Engle 110 w/ 1.4's. Oh yeah , and drilled valves.
Larry
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| What cam are you using? http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=3&t=1227 |
Page 1 of 1 |
| Author: | DVS1 [ Tue Sep 18, 2007 9:56 pm ] |
| Post subject: | What cam are you using? |
I just being curious and was wondering what cam and rockers everyone is running. |
|
| Author: | kybuggy1 [ Tue Sep 18, 2007 9:59 pm ] |
| Post subject: | |
Engle 110 w/ 1.4's. Oh yeah , and drilled valves.
Larry |
|
| Author: | DVS1 [ Tue Sep 18, 2007 10:03 pm ] |
| Post subject: | |
How did I know you were going to say drilled valves. 
|
|
| Author: | kybuggy1 [ Tue Sep 18, 2007 10:05 pm ] |
| Post subject: | |
Sorry, couldnt resist!
Larry |
|
| Author: | The Wild Kids [ Tue Sep 18, 2007 11:00 pm ] |
| Post subject: | |
What size motor are you working on? Mine is a 1915 with Engle 110 and 1.25 rockers. Motor pulls all the way through and never had any problems no matter the RPM range (within reason). The Wild Kids |
|
| Author: | DVS1 [ Tue Sep 18, 2007 11:27 pm ] |
| Post subject: | |
I'm not working on any I was just curious in different cams that we run up here compared to the southern boys. I have a Engle TCS-20, but all the motors I have built have Engle W-110's in them. |
|
| Author: | Roy [ Wed Sep 19, 2007 6:36 am ] |
| Post subject: | |
My 2276 has an FK-43 w/1.4 rockers. I have used all of these in the past two years in the buggy motors I have built. Engle 110 w/1.25 Engle VZ-15 w/1.1 Engle VZ-25 w/1.1 Engle FK-8 w/1.4 2) Crower 61004 Split Duration w/1.25 (nice cam) |
|
| Author: | bert [ Wed Sep 19, 2007 6:28 pm ] |
| Post subject: | |
I have fk42 with 1.4 |
|
| Author: | Stevo [ Wed Sep 19, 2007 7:48 pm ] |
| Post subject: | |
you know what i'm runing |
|
| Author: | Roy [ Thu Sep 20, 2007 8:32 pm ] |
| Post subject: | |
[quote='Stevo']you know what i'm runing[/quote] I don't. Please share...... 
|
|
| Author: | DVS1 [ Thu Sep 20, 2007 8:34 pm ] |
| Post subject: | |
He has a W-110 with 1.25 rockers |
|
| Author: | Stevo [ Fri Sep 21, 2007 2:28 pm ] |
| Post subject: | |
DVS1 biult my motor. He knows it better than I do. |
|
| Author: | plumberbill [ Fri Sep 21, 2007 3:47 pm ] |
| Post subject: | |
[quote='Stevo']DVS1 biult my motor. He knows it better than I do.[/quote] this is why i'm gonna stay friends with odyknuck during my type 4 build |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|