I'm having some drums turned for the front of my buggy i have kingpin front end and all he has is balljoint hubs he said i could buy bearings that would go from balljoint hub to kingpin spindle just wondering if anyone has done this and if so where can i find the bearings to do it thanks

The way I did mine was using Bettle rotors and (inner bearing)Timken 30205M 9\KMI and (outer bearing)
SKF 32004 X/Q. The races where the original bearings were will need to be machined to except the new larger races. Inexpencive front brakes for a link pin beam.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

thank you

just wondering is this the bearings i need http://cgi.ebay.com/ebaymotors/VW-BUG-G ... 0101237606

According to their descripition, they will work.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

Will the 6.70X15 v treads fronts mounts onto my spindle mounts i think they are 5x15 or would there be an advantage to go with cut hub and stock vw wheel if I'm not going to run front brakes at this time? thanks