WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

WTB Wide 5 Aluminums with Beadlocks
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=29&t=8440		 Page 1 of 2
Author:  nitro_mudder [ Sat Jan 16, 2010 3:49 pm ]
Post subject:  WTB Wide 5 Aluminums with Beadlocks
Anyone have any for sale? Or recomend a site?
Author:  dunebuggynut [ Sat Jan 16, 2010 3:55 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Mine came from ebay. 15x12 Weld wide5. I paid 72.00 shipped for 1 & 90.00 for the other
Author:  Firebug [ Sat Jan 16, 2010 3:59 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
dunebuggynut wrote:
Mine came from ebay. 15x12 Weld wide5. I paid 72.00 shipped for 1 & 90.00 for the other


same here,,the 12"s are a little more scarce than the 14's, what width you need?
Author:  nitro_mudder [ Sat Jan 16, 2010 4:24 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
I think the 15x14's will do, i need to check my offset.
Author:  rail1914 [ Sat Jan 16, 2010 4:56 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
i know some one that has set that is tring to sell they are wide 5 with bead locks they are dugles wheels ill give him a call and tell him to post on here
Author:  dunebuggynut [ Sat Jan 16, 2010 4:58 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
nitro_mudder wrote:
I think the 15x14's will do, i need to check my offset.


Usually you need 5" backspace with 3x3's. That depends on the rear cage design as well as shock mounting though. 2x3's need 4" backspace usually.
Author:  BigScott [ Sat Jan 16, 2010 5:07 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
I have a set of douglas wide 5 wheels. Here's the link.

http://www.woodsbuggy.com/index.php?opt ... f=7&t=7743
Author:  afterburnt [ Sat Jan 16, 2010 6:06 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Check out race junk, they have some wide 5 wheels. http://www.racingjunk.com/category/45/T ... dlock.html
I just bought two off a guy in Kentucky. He said that he had about 10 rims. His phone number is: 859-743-7108
Author:  nitro_mudder [ Sat Jan 16, 2010 9:28 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Big scott, $1200 is way out of my range that I Want to spend.

Afterburnt, this style any good as far as strength? The price sounds great and I assume I need to get adapters from instigator to go with them.
Author:  hyde [ Sat Jan 16, 2010 9:33 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Nitro there is a swap meat in Indianapolis jan 30
Author:  nitro_mudder [ Sat Jan 16, 2010 9:45 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Might have to check that out. The one in lansing isn't untill march I think.
Author:  afterburnt [ Sat Jan 16, 2010 9:58 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
I just got my rims, I haven't tried them yet. But this is what everyone is running, and they seem to be holding up for them. And besides, at $150 a rim, if you do mess one up that bad, it's not a whole lot of money.

Dave
Author:  dunebuggynut [ Sat Jan 16, 2010 10:14 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
You guys need to shop around. I got 160 ish in my alum.pair & I bought 4 carbon fiber 14 wides over the last 6 months with the cheapest 55 bucks to 90 for one with a perfect Hoosier still mounted. Watch ebay & bid till you get em. I probably bid on 30 & won 6. Depending on where they are I might be able to pick em up & save shipping.

Nitro, the adapters Russ sells are monsters. Its the only set youll ever need. I used to bend VW adapters. These aint bending.
Author:  Maddog [ Sat Jan 16, 2010 11:12 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
I've got some of Russ's also, you're not going to beat his adapters.
Author:  nitro_mudder [ Sun Jan 31, 2010 8:09 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Ok next saga in this tale. I've got someone willing to trade wide 5 aluminums for my steels. But, I'm having trouble finding any weld on beadlocks for the aluminums, any ideas? And sorry Ody, but I cant afford the bad a$$ ones your buddy makes. Also any idea what thicknes I need these rims to be to be any good in the woods? I'm waiting to hear back on the specs.
Author:  Rick [ Mon Feb 01, 2010 11:00 am ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
nitro mine are the two piece off road .190 thick they will take the beating but there is no economical way to beadlock them.
Author:  Odyknuck [ Mon Feb 01, 2010 4:20 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
No problem, I would try Drews for aluminum weld ons. They have them now and then for around 150 a set.
Another source is MRWs.

nitro_mudder wrote:
Ok next saga in this tale. I've got someone willing to trade wide 5 aluminums for my steels. But, I'm having trouble finding any weld on beadlocks for the aluminums, any ideas? And sorry Ody, but I cant afford the bad a$$ ones your buddy makes. Also any idea what thicknes I need these rims to be to be any good in the woods? I'm waiting to hear back on the specs.
Author:  nitro_mudder [ Mon Feb 01, 2010 4:43 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Didn't your guy want $175 each?
Author:  hyde [ Tue Feb 02, 2010 6:52 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Yes Drews has aluminum beadlocks & they will weld them on if needed.
Author:  nitro_mudder [ Tue Feb 02, 2010 7:00 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
I called yesterday. $130 per wheel.
Author:  gasman [ Tue Feb 02, 2010 7:48 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
nitro_mudder wrote:
I called yesterday. $130 per wheel.

http://www.poske.com/garage_sale.htm
nitro_mudder wrote:
Anyone have any for sale? Or recomend a site?
if you would like some 15x12x5 they have them on sale right now for 180.00.or go with what i have for 255.00 and you can run any size with any offset from 1 to 6 inches and they are three piece so if you bend one or tear a side up you just order that half.they are made by keizer i think they have been bought or changed hands since i got mine so who knows how much they are now even the web site is diffrent.but dont let them ky guys know it but they only weigh 9.5lbs each.lol.chad :mrgreen:http://www.keizerwheels.com.
Author:  nitro_mudder [ Tue Feb 02, 2010 8:35 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
I called and left a message for them to call me tomorrow. Thanks for the info Chad 8)
Author:  bmoore [ Tue Feb 02, 2010 8:50 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
thats a nice site very nice looking wheels...
Author:  nitro_mudder [ Wed Feb 03, 2010 12:26 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
Chad I talked to him today, and the prices he gave me where WAY higher. Used set for $500 plus shipping was the best he offered, no thanks.

gasman wrote:
nitro_mudder wrote:
I called yesterday. $130 per wheel.

http://www.poske.com/garage_sale.htm
nitro_mudder wrote:
Anyone have any for sale? Or recomend a site?
if you would like some 15x12x5 they have them on sale right now for 180.00.or go with what i have for 255.00 and you can run any size with any offset from 1 to 6 inches and they are three piece so if you bend one or tear a side up you just order that half.they are made by keizer i think they have been bought or changed hands since i got mine so who knows how much they are now even the web site is diffrent.but dont let them ky guys know it but they only weigh 9.5lbs each.lol.chad :mrgreen:http://www.keizerwheels.com.
Author:  dunebuggynut [ Wed Feb 03, 2010 2:42 pm ]
Post subject:  Re: WTB Wide 5 Aluminums with Beadlocks
http://cgi.ebay.com/ebaymotors/Weld-15x14-alum-racing-wheel-dirt-late-model_W0QQitemZ280457473060QQcmdZViewItemQQptZRace_Car_Parts?hash=item414c916c24

HURRY UP!!! It has an hour left & it can be had for 70 bucks shipped if you are the only bidder. 3" offset is good for your 2x3's
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/