Looking into new rims for the front, I'm goint to be running some 7.0-15 tire. Should I go with 5" or 6" wide wheels?

_________________
A broken clock is right two times a day.

If ya want a wider, little bit shorter tire, I'd say the 6". If you're lookin for ground clearance, i'd say the 5", but it'll make your tire much skinnier. It's pretty much all in what you're lookin' for.

-Dakotah/koko

_________________

-Dakotah/koko
keep on keepin' on!!

I am running that size tire and went with 5". You can see pics on the build page. I think 6" would have been too wide for that tire. Just my opinion.

I have that tire with 5s and i think its great.

_________________
Turbocharged Ecotec,vanogon midshift,Berrien WoodsBuggy wagon.

4 3/4 centerlines

You always have the good stuff

_________________
A broken clock is right two times a day.

I had mine on 5.5 Douglas wheels and I liked the wider foot print. I have them on 4" centerlines and they are ok however the wheel offset is not to my liking. Tpo much scrub radius. Your better off with a 5 or 5.5 with a 3.5" backset to keep the tire centerd over the spindel pivot to minimize scrub.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

I have mine on vw stock 4 hole rims and mounted the rim backwards. I can turn both ways without tires rubbing on frame.
Tony

_________________
Tony