rim is 12,adapters 3, cord cut 4ply around 16-17
31 32 sorry
you can easily pick my tire up with one hand. thats why i am scared of heavy boggers. carbon rims are 8 lbs
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| bogger/rim total weight http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=29&t=5763 |
Page 1 of 1 |
| Author: | plumberbill [ Tue Feb 10, 2009 4:05 pm ] |
| Post subject: | bogger/rim total weight |
i weighed my 16/35-15 cut boggers on 15x12 weld alumunim rims with 1/2 inch aluminum adapters and tubes, total weight is 90lbs just wonder where others are weighing in at. |
|
| Author: | Kyle [ Tue Feb 10, 2009 4:56 pm ] |
| Post subject: | Re: bogger/rim total weight |
holy hell. the vtreads with beadlocks and adapters are around 30 pounds. o cut firestones/15x14 weld alum beadlock/3/8th's alum adapters. no tubes. |
|
| Author: | hillaholic [ Tue Feb 10, 2009 7:02 pm ] |
| Post subject: | Re: bogger/rim total weight |
Kyle wrote: holy hell. the vtreads with beadlocks and adapters are around 30 pounds. o cut firestones/15x14 weld alum beadlock/3/8th's alum adapters. no tubes. How are you getting 30lbs? The rims weigh around 15lbs The 8ply uncut firestones weigh 68lbs I would think the adaptor with the studs weighs around 5lbs That totals around 88lbs Maybe I don’t understand 0 cut firestones. Does that mean they are uncut? Or are they totally cut 4plys? Bill I weighed mine and they are 76lbs. I will double check them again to make sure that is correct. 35x14.5x15 boggers/ 15x14 beadlocks/ 1" adaptors with bolts. |
|
| Author: | DVS1 [ Tue Feb 10, 2009 8:34 pm ] |
| Post subject: | Re: bogger/rim total weight |
hillaholic wrote: Kyle wrote: holy hell. the vtreads with beadlocks and adapters are around 30 pounds. o cut firestones/15x14 weld alum beadlock/3/8th's alum adapters. no tubes. How are you getting 30lbs? TOO MUCH YEAGERMEISTER!!! |
|
| Author: | Kyle [ Tue Feb 10, 2009 8:44 pm ] |
| Post subject: | Re: bogger/rim total weight |
rim is 12,adapters 3, cord cut 4ply around 16-17 31 32 sorry you can easily pick my tire up with one hand. thats why i am scared of heavy boggers. carbon rims are 8 lbs
|
|
| Author: | Kyle [ Tue Feb 10, 2009 8:48 pm ] |
| Post subject: | Re: bogger/rim total weight |
jager bad!! |
|
| Author: | Baddvw [ Tue Feb 10, 2009 11:10 pm ] |
| Post subject: | Re: bogger/rim total weight |
I do not know what my wheels and tires weigh, but I do know that they run damn good on them hills!! 
|
|
| Author: | plumberbill [ Wed Feb 11, 2009 7:51 pm ] |
| Post subject: | Re: bogger/rim total weight |
i guess 90lbs isn't to bad. according to the book the 16/35-15LT is 85lbs brand new. the 35x14.50-15LT weighs in at 74lbs brand new |
|
| Author: | mudd mutt [ Tue Feb 17, 2009 4:52 am ] |
| Post subject: | Re: bogger/rim total weight |
Kyle wrote: rim is 12,adapters 3, cord cut 4ply around 16-17 31 32 sorry you can easily pick my tire up with one hand. thats why i am scared of heavy boggers. carbon rims are 8 lbs Dude bring 1 of them up so I can weigh it,,,I think your off by bout 10-15 lbs lol damn smoke in your eyes again 
|
|
| Author: | Kyle [ Tue Feb 17, 2009 11:48 am ] |
| Post subject: | Re: bogger/rim total weight |
we weighed them at scotts 
|
|
| Author: | earlytimz [ Wed Mar 04, 2009 11:53 am ] |
| Post subject: | Re: bogger/rim total weight |
Fresh cut 16x35-15 boggers on steel wheels weigh right around 97# according to my bathroom/ shop scales. I didn't take as much rubber off as some folks do, only about 15# per tire. |
|
| Author: | Kyle [ Wed Mar 04, 2009 8:59 pm ] |
| Post subject: | Re: bogger/rim total weight |
get a weld alum wheel on there and drop ya 20-25 pounds per wheel |
|
| Author: | hillaholic [ Fri Apr 03, 2009 10:06 pm ] |
| Post subject: | Re: bogger/rim total weight |
I just weighed my 35x14.5x15 Boggers with Duralight beadlock wheels, 1" adaptors, and tube. Total weight 74.5lbs each 
|
|
| Author: | JeffClay [ Fri Apr 03, 2009 10:22 pm ] |
| Post subject: | Re: bogger/rim total weight |
Bradley, did you read the operating instruction carefully before operating??? |
|
| Author: | plumberbill [ Sat Apr 04, 2009 8:15 am ] |
| Post subject: | Re: bogger/rim total weight |
JeffClay wrote: Bradley, did you read the operating instruction carefully before operating??? Lol! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|