WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
rim and combo spindle question http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=29&t=16361 |
Page 1 of 1 |
Author: | Scrapmetal Buggy [ Tue Nov 26, 2013 10:36 pm ] | ||
Post subject: | rim and combo spindle question | ||
Ok im getting ready to do a thru all front end on my buggy and I have combo spindles with it will these rims work with what I have ?
|
Author: | Scrapmetal Buggy [ Wed Nov 27, 2013 8:07 pm ] |
Post subject: | Re: rim and combo spindle question |
someone on here has to know something lol |
Author: | gasman [ Wed Nov 27, 2013 8:19 pm ] |
Post subject: | Re: rim and combo spindle question |
Your rim will have to have the same bearings as your spindle needs. What are the rims off of,B/J or K/P? Need a little more info to try and help you out. Chad |
Author: | volksdude2007 [ Wed Nov 27, 2013 8:43 pm ] |
Post subject: | Re: rim and combo spindle question |
I took them off my king pin and they have no races in them I pressed them out to use for my hubs |
Author: | afterburnt [ Wed Nov 27, 2013 9:17 pm ] |
Post subject: | Re: rim and combo spindle question |
you cant run front breaks with those rims . if you run wellsville you need breaks. lets see some pic of the frontend your using. |
Author: | Scrapmetal Buggy [ Wed Nov 27, 2013 9:25 pm ] |
Post subject: | Re: rim and combo spindle question |
i've been running wellsville for years with all my buggys i live 20 mins from there - never had back brakes on a buggy ever - the front end is king pin i'l have to get some pics tomarro and post them of the set up - i have a 6inch wider warrior beam now thats shot- kingpin and the thru all front end is king pin also |
Author: | Scrapmetal Buggy [ Wed Nov 27, 2013 9:26 pm ] |
Post subject: | Re: rim and combo spindle question |
oh and the thru all front end is 6 inches wider also |
Author: | dirtdobber [ Wed Nov 27, 2013 9:55 pm ] |
Post subject: | Re: rim and combo spindle question |
No rear brakes??? Posted using the WoodsBuggy Mobile App |
Author: | Scrapmetal Buggy [ Wed Nov 27, 2013 10:11 pm ] |
Post subject: | Re: rim and combo spindle question |
I have rears just never had front brakes |
Author: | Scrapmetal Buggy [ Wed Nov 27, 2013 10:29 pm ] | ||
Post subject: | Re: rim and combo spindle question | ||
ok heres the wore out front end on her now
|
Author: | Scrapmetal Buggy [ Wed Nov 27, 2013 10:30 pm ] | ||
Post subject: | Re: rim and combo spindle question | ||
its pretty bad
|
Author: | Scrapmetal Buggy [ Wed Nov 27, 2013 10:38 pm ] | ||
Post subject: | Re: rim and combo spindle question | ||
heres the other front end gotta put the longer arms on still
|
Author: | Scrapmetal Buggy [ Wed Nov 27, 2013 10:39 pm ] | ||
Post subject: | Re: rim and combo spindle question | ||
and the combo spindles
|
Author: | dirtdobber [ Wed Nov 27, 2013 10:44 pm ] |
Post subject: | Re: rim and combo spindle question |
Ok sorry good looking spindle. Good luck Posted using the WoodsBuggy Mobile App |
Author: | Scrapmetal Buggy [ Fri Nov 29, 2013 12:21 pm ] |
Post subject: | Re: rim and combo spindle question |
can anyone make anything out of what i posted ?- i'd really like to know so i can buy the rims !! |
Author: | gasman [ Fri Nov 29, 2013 4:47 pm ] |
Post subject: | Re: rim and combo spindle question |
I'm sure you can make them work. You will have to replace the insides since there not there so you should be able to buy what you need to make them fit. Chad |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |