| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| what am I missing http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=29&t=13488 |
Page 1 of 1 |
| Author: | BradHall [ Sat Apr 07, 2012 10:58 pm ] |
| Post subject: | what am I missing |
I recently bought a set of new spindle steel wheels that say they require stock kingpin bearings. I put the bearing and races in along with the inner seal and went to mount them on my stock kingpin spindles but it seems like I am missing something it seems to seat to far against the spindle and has space between the spindle nut and the bearing. Is there suppose to be another washer or spacer or something. |
|
| Author: | buggiejunky [ Sat Apr 07, 2012 11:04 pm ] |
| Post subject: | Re: what am I missing |
there is a spacer that goes between back of spindle and inner bearing that the seal rides on |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|