I have 2 banshees. one is setup for fast trails and woods riding and the other is setup for asphalt drag racing.
**********links for pics in the bottom of the post.***************


Here is info on the drag banshee.

04 frame is stock painted silver. its has a set of blue plastics with some pretty
slick chrome stickers. its got some nice drag slicks on the stock back wheels
and some small skinny tires on the front on some aftermarket smaller chrome
wheels. front suspension is stock but the shocks have been adjusted waaay down
to make the front end lower and very stiff.. the rear end is a chrome +6
lonestar swingarm. it has the stock front brakes the back brakes are in place
but no fluid, so the brakes wont drag the back rotor.

stock crank trued and welded. stage 4 port job by azcustoms i think. cool head
with 17cc domes not sure what the reed valves are. but the reed cages were
ported also. the carbs
are either 34 or 35. and i dont know if they are pj or pwk. and twin K & N
filters. and this one has dynatech programable ignition.
ran 109 octane in it.

here is info on the trails/woods banshee

it is a 92 banshee frame powdercoated orange
has a set of grey plastics, and a set of blue plastics that have been
cut.
stock white wheels blue hubs front and back. crappy tires on front, and very
nice holeshots on the back, with plenty of tread left.
now to the goods
the engine has a wiseco hot rods racing crank, trued and welded of course
the cylinders were bored by http://www.langcourt.com/index.htm, and have a set
of Wiseco's matched to the cylinders
the cylinders have a trinity racing stage II port job, and trinity stage II can
be seen inscribed onto the exterior of the cylinders.
It has a proDesign cool head to top things off with 20cc domes.
It has the MSD programmable ignition .
http://www.msdpowersports.com/atv_yamahabanshee.html which the holeshot feature
is not hooked up but can be very easily set up for drag racing.
Boyesen reed valves
The carb tops on the stock carbs were very messed up so I removed them and
purchased the a single carb kit. It has the 35mm pwk carb with a K&N filter. it
has toomey T-4 pipes. they are painted black. they perform well but i think
replacing them is about the only thing that this quad needs to make it really
bad ass.
It has a set of +2/=1 adjustable a-arms in the front with a set of dual rate
works shocks.
and a very very nice +4 rear swing arm. with a stock shock in back. all 3 shocks
have shock wears on them.
It has a set of DG nerfs with blue webbing.

here is a pic of the drag racing banshee
http://www.theresurrectionclan.com/foru ... 27-250.jpg

and here are 2 pics of the woods/trails banshee one with grey fenders and one with the
blue fenders. i still have both sets of fenders. the greys are on it now.
http://www.theresurrectionclan.com/foru ... r/GP1a.JPG
http://www.theresurrectionclan.com/foru ... r/BP1a.JPG

$6000 gets both of them, if you dont want them.... just find me somebody that does.. lol they need to go so i can build my buggy.