WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

drilling a hole in a frame
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=26&t=8860		 Page 1 of 1
Author:  aboone993 [ Fri Feb 26, 2010 5:06 pm ]
Post subject:  drilling a hole in a frame
Before I bore a hole in my frame tell me if you guys think this is ok
I am wanting to bore a 3/4 hole in my frame and slip a piece of 3/4 steer shaft in the hole and weld it in place to maks a sleeve to put my limit strap adj clevis thru . will this create any issues ?

example
Image
Author:  nitro_mudder [ Fri Feb 26, 2010 5:40 pm ]
Post subject:  Re: drilling a hole in a frame
If you weld a sleeve in it it should be stronger then stock. If it's welded properly. :mrgreen:
Author:  Rick [ Sat Feb 27, 2010 9:56 am ]
Post subject:  Re: drilling a hole in a frame
thats how i done my limit straps works great
Author:  COOTERGUY [ Sat Feb 27, 2010 10:44 am ]
Post subject:  Re: drilling a hole in a frame
I had thought of that idea, but also using the next size tube that when cut in half could be welded over the spot your were going to drill the hole in order to reinforce it. Where is the best place to get the limit straps from?
Author:  Firebug [ Sat Feb 27, 2010 11:46 am ]
Post subject:  Re: drilling a hole in a frame
PM David on this site he has great straps.
Author:  JeffClay [ Sun Feb 28, 2010 2:39 am ]
Post subject:  Re: drilling a hole in a frame
you should be fine boone.... COOTER..... OR you could try one of our sponsers :wink:
Author:  kybuggy1 [ Mon Mar 01, 2010 1:40 am ]
Post subject:  Re: drilling a hole in a frame
David IS a sponsor, but doesnt advertise. He always gives money for event prizes, has contributed greatly to sponsor fundraising for the hillclimb series, and makes high quality straps for most WB.com members for less money than any other places can ship them , let alone their selling price.
Author:  JeffClay [ Mon Mar 01, 2010 10:45 pm ]
Post subject:  Re: drilling a hole in a frame
well sorry i thought all our sponsors were advertised, i wasn't aware of the secret society!
Author:  nitro_mudder [ Mon Mar 01, 2010 11:10 pm ]
Post subject:  Re: drilling a hole in a frame
He hooked me up, cheep and fast!!!!
Kybuggy1 has his #
Author:  kybuggy1 [ Tue Mar 02, 2010 9:08 am ]
Post subject:  Re: drilling a hole in a frame
There is nothing secret about it, he just likes to help out woodsbuggiers and expects nothing from the site in return.
Author:  Firebug [ Tue Mar 02, 2010 9:18 am ]
Post subject:  Re: drilling a hole in a frame
David Hill is a hoot too,,and can drive the wheels of a buggy,,,if the lug nuts are as loose :mrgreen:
Author:  JeffClay [ Tue Mar 02, 2010 10:01 pm ]
Post subject:  Re: drilling a hole in a frame
yeah well by there being no advertising, i have no idea who donates money. also, i said "secret society" does that not sound sarcastic? i guess i cant be a smart ass with people that dont know me. because most people know how i am. my bad sorry to wad up ur panties! :twisted:
Author:  rockrockets1 [ Wed Mar 03, 2010 1:09 pm ]
Post subject:  Re: drilling a hole in a frame
Jeff this place no longer has a sense of humor :shock:
It's like the Democrats it left with the last administration
Author:  nitro_mudder [ Wed Mar 03, 2010 1:19 pm ]
Post subject:  Re: drilling a hole in a frame
Now now rock, some of us still like a little ribbing in the forum. But we've been doing most of it in chat at night.
Author:  rockrockets1 [ Wed Mar 03, 2010 1:28 pm ]
Post subject:  Re: drilling a hole in a frame
I was not talking about the Members ...There still the same :wink: Just like the people,we just got a F-*&^% up bunch running the show .The good thing is we only got 3 more years of this shit left .Too bad not here
Author:  Firebug [ Wed Mar 03, 2010 2:20 pm ]
Post subject:  Re: drilling a hole in a frame
rockrockets1 wrote:
I was not talking about the Members ...There still the same :wink: Just like the people,we just got a F-*&^% up bunch running the show .The good thing is we only got 3 more years of this shit left .Too bad not here

Not sure I understand but it sounds like you want to run the show,,that can be arranged,,,but I wouldn't do that to you buddy . 8)
Author:  JeffClay [ Wed Mar 03, 2010 7:26 pm ]
Post subject:  Re: drilling a hole in a frame
well whatever it doesn't matter everyone always says to buy from our sponsors so i was just stating, you know, trying to help them out. So sorry causing so much commotion, btw, i didn't really hi-jack this.

over and out.
Author:  aboone993 [ Wed Mar 03, 2010 11:31 pm ]
Post subject:  Re: drilling a hole in a frame
Hell I just wondered about a hole in a frame .
Author:  MickeyMouse [ Wed Mar 03, 2010 11:37 pm ]
Post subject:  Re: drilling a hole in a frame
Man.. Talk about a hi-jacked post.. I think this one was hi-jacked and crashed..
Author:  JeffClay [ Wed Mar 03, 2010 11:39 pm ]
Post subject:  Re: drilling a hole in a frame
i was just answering questions, sorry that it got hijacked.... :(
Author:  aboone993 [ Wed Mar 03, 2010 11:45 pm ]
Post subject:  Re: drilling a hole in a frame
Jeff it was not against you I appreciate everyone help
Its the pissing match between a few that has went on entirely tooooo long that I was referring to .
Hi jack away ....Oh I think I just did
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/