Looking at this bender, wife said I can buy one, wooo hooo. Trying to decide which one I need.

_________________
[url=http://www.TickerFactory.com/]

[/url]

Just ordered one for 1.5" 240deg for $405 Shipped. Wish me luck, I'll let you know how it works.

_________________
[url=http://www.TickerFactory.com/]

[/url]

I have one and have been happy with it. Basically built an entire frame with it with no problems. The dies are relatively cheap compared with the JD models but the quality seems to be good.

well have you used your bender yet ? I am going to buy a bender next week and was curious what you thought about yours .

it has not arrived yet, I ordered (at a later date) the Hydrolic Mod. Sounds like I should have it early next week. I will post pics and comments as soon as I get to use it.
Jason

_________________
[url=http://www.TickerFactory.com/]

[/url]

what kind are you lookin at man?

_________________
lets just ride

Tube Tek
http://www.tubetek.net/
$405 Delivered for 4.5 with 1.5" dies.
$50 adder for Hydrolic setup
$100 for the air over Hydrolic cylinder

_________________
[url=http://www.TickerFactory.com/]

[/url]

Thanks Nitro _mudder I will hold off until you get yours and you post what you think of it I have been looking at it and a jd model 3 bender

Just talked with Cliff today, hell of a nice Virgina Guy. Says he had to remake an arm he wasn't happy with the quality, had some blemishes I think. So he is remaking the arm and shipping it early next week. Gave me the Hydo Atachment for free because of the delay. So if I dont ride next weekend I will get to try it out.

_________________
[url=http://www.TickerFactory.com/]

[/url]

any updates yet?

_________________
Just Stand On It!!!!

Chris

Shipped Yesterday, Degree wheel was added free as well because of the delay. I still need to get the Hydrolic cylinder as well from Harbor Freight.

_________________
[url=http://www.TickerFactory.com/]

[/url]

just checking

_________________
Just Stand On It!!!!

Chris

Between getting my Spare 6 rib, 930 flanges, radiator repaired, and next weekends trip the cylender will be put on hold till shortly after Lab Day ride.

_________________
[url=http://www.TickerFactory.com/]

[/url]

Got the bender around wednesday last week. Came in 2 boxes that looked like a cpl front rims, made of lead, lol. Soon as I get reorganized from the weekends trip I'll set it up.

_________________
[url=http://www.TickerFactory.com/]

[/url]

hows the set up on the bender coming?

_________________
lets just ride

It's built and seting on my garage floor waiting for a stand. Been busy with my power steering, sorry. Just finishing it up right now. Next week I should get to play with it, lol. I need to do some tube work before I go to D&K on Halloween.

_________________
[url=http://www.TickerFactory.com/]

[/url]

Ok, I got the base made tonight but I need to go get a piece of steel from the scrap yard in the morning for the stand. Then I will FINALLY get to test it out. Sorry about the delay, power steering and S-10 brakes took precidence,

_________________
[url=http://www.TickerFactory.com/]

[/url]

No hurries It is still riding season . Just let me no how you like it after you try it out.

Just bent my first two 90deg pieces of 1-1/2" .125 wall DOM. Worked great and bent it easy enough. Deffinately glad I got the air over hydrolic cylinder upgrade I'll post some pics later. Took a little persuasion to get the pin out to remove the pipe. May be due to the .125 wall. But that aside I was very pleased with it.

_________________
[url=http://www.TickerFactory.com/]

[/url]

Here is a vid, and a few pics. Enjoy.

_________________
[url=http://www.TickerFactory.com/]

[/url]

thats sweat. where did u find the stand then?

I made it, wanted one that came apart for storage. Used 2" hitch reciever on the stand and bender. Then 2" square stock between the two. Worked out pretty well. Oh and I bent some .095 wall today and it came apart much easier.

_________________
[url=http://www.TickerFactory.com/]

[/url]

thats a sweet setup. Ive been contemplating getting a bender and building myself a new frame or just buying a berrien warrior knock down. This is really making me want to build me own frame.

Now I need a tube notcher to speed up that end. I sure wouldn't build a frame without one or a good plasma cutter.

_________________
[url=http://www.TickerFactory.com/]

[/url]

Did all this come from tube tek ?