WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
Frame Horn Bungs http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=26&t=16704 |
Page 1 of 1 |
Author: | UncleJerm76 [ Sat Feb 22, 2014 11:14 pm ] |
Post subject: | Frame Horn Bungs |
I'm having a hard time finding some frame horn bungs, the kind you would use if your making your own tubular frame horns. Anyone know where I can find a pair? What are you guys using if they aren't available - just welding in some Grade 8 nuts? |
Author: | Red Barron [ Sun Feb 23, 2014 4:30 am ] |
Post subject: | Re: Frame Horn Bungs |
I always cut them off a junk torsion. But a grade eight nut would work |
Author: | UncleJerm76 [ Mon Feb 24, 2014 1:55 pm ] |
Post subject: | Re: Frame Horn Bungs |
Thanks Barron, looks like "Ace is the place with the helpful hardware..." |
Author: | RaceBugg1098 [ Tue Feb 25, 2014 12:19 pm ] |
Post subject: | Re: Frame Horn Bungs |
just use some 2 bolt flanges. I weld the rear bottom mounting plate to the tubes. You dont really need to remove it anyway. |
Author: | UncleJerm76 [ Tue Feb 25, 2014 10:08 pm ] |
Post subject: | Re: Frame Horn Bungs |
RaceBugg1098 wrote: just use some 2 bolt flanges. I weld the rear bottom mounting plate to the tubes. You dont really need to remove it anyway. No need to weld the plate to the horns, I like being able to remove it with my engine and trans as one unit. But a two bolt flange on each side isn't a bad idea at all. Especially if I combine it with a smaller short inner tube as a guide. Thanks Sent via TapaTalk |
Author: | UncleJerm76 [ Fri May 09, 2014 10:42 am ] |
Post subject: | ISO Frame Horn Bungs |
Looks like I'm still stuck on trying to find two frame horn bungs - aka weld-in nuts. Once I get an idea in my stubborn head its really hard to change it LOL. So if anyone has two stock Frame Horn Bungs in good shape (not cross-threaded) for sale please let me know. I will post in the Classifieds too, but wanted ask here since I already had this thread going about the topic. I will post back here when I no longer need them. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |