WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
Axle lengths http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=26&t=16378 |
Page 1 of 1 |
Author: | blackbeauty [ Sat Nov 30, 2013 1:32 pm ] |
Post subject: | Axle lengths |
Ok on my buggy I'm running the bus torsion but I swapped in some beetle trailing arms I measured from from inside my stubs to inside tranny cv cups I got 18.25 inches i can't seem to find no axles that size there either 17.5 or 18.75 am I missing something here any help would be sweet thanks |
Author: | bradley59dzl [ Sat Nov 30, 2013 1:44 pm ] |
Post subject: | Re: Axle lengths |
I always set suspension so flanges are straight across from each other. Measure inside to inside. then subtract 1/4 from total length. You will also want to ck them at full droop. |
Author: | blackbeauty [ Sat Nov 30, 2013 1:56 pm ] |
Post subject: | Re: Axle lengths |
The 18.25 was straight across at full drop my stock 18.75 are good there is minimal splines so I can't trim them Posted using the WoodsBuggy Mobile App |
Author: | Psycho Alpha [ Sun Dec 01, 2013 11:25 am ] |
Post subject: | Re: Axle lengths |
I needed 17" axles, had to buy 17.5 and cut them down. The aftermarkets have around 3" of splines. Appletree is having a sale until Dec. 2. I saw some up to 40% off. Posted using the WoodsBuggy Mobile App |
Author: | buggybarn [ Sun Dec 01, 2013 8:11 pm ] |
Post subject: | Re: Axle lengths |
bradley59dzl wrote: I always set suspension so flanges are straight across from each other. Measure inside to inside. then subtract 1/4 from total length. You will also want to ck them at full droop. X 2 |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |