WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Opinions needed on engine and transmission mounting
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=26&t=16113
Page 1 of 1

Author:  giveitagallon [ Sat Oct 05, 2013 9:40 am ]
Post subject:  Opinions needed on engine and transmission mounting

Need your thoughts on this . If I remove the two tabs that connect to the top of the transmission it would be much easier to install motor and trans do you guys feel the engine mounts and front trans mount would be enough to hold it in place without having issues ?

Author:  giveitagallon [ Sat Oct 05, 2013 9:42 am ]
Post subject:  Re: Opinions needed on engine and transmission mounting

Attachment:
ImageUploadedByWoodsBuggy1380980484.071183.jpg
ImageUploadedByWoodsBuggy1380980484.071183.jpg [ 81.72 KiB | Viewed 6409 times ]
Attachment:
ImageUploadedByWoodsBuggy1380980502.605860.jpg
ImageUploadedByWoodsBuggy1380980502.605860.jpg [ 81.47 KiB | Viewed 6409 times ]
Attachment:
ImageUploadedByWoodsBuggy1380980519.327156.jpg
ImageUploadedByWoodsBuggy1380980519.327156.jpg [ 85.16 KiB | Viewed 6409 times ]



Posted using the WoodsBuggy Mobile App

Author:  davidk [ Sat Oct 05, 2013 9:48 am ]
Post subject:  Re: Opinions needed on engine and transmission mounting

What engine are you gonna run?


Posted using the WoodsBuggy Mobile App

Author:  giveitagallon [ Sat Oct 05, 2013 9:51 am ]
Post subject:  Re: Opinions needed on engine and transmission mounting

Subaru :twisted:

Author:  davidk [ Sat Oct 05, 2013 10:14 am ]
Post subject:  Re: Opinions needed on engine and transmission mounting

I shoulda know by the gasket Layin there lol. Is there a way to make them removable so they can be taken out and reinstalled??


Posted using the WoodsBuggy Mobile App

Author:  davehix [ Sat Oct 05, 2013 8:27 pm ]
Post subject:  Re: Opinions needed on engine and transmission mounting

I run all 4 bolts in front mount . and both top and bottom in rear. but with a subi you should be fine lol :evil: :twisted: :mrgreen:

Author:  gasman [ Sat Oct 05, 2013 8:51 pm ]
Post subject:  Re: Opinions needed on engine and transmission mounting

If it was easy everybody would have one,lol. :D I'd run it with all the mounts myself. Chad :mrgreen:

Author:  Odyknuck [ Sun Oct 06, 2013 8:29 am ]
Post subject:  Re: Opinions needed on engine and transmission mounting

Use the top mounts and add the ones on the bottom of the engine.

Author:  Red Barron [ Mon Oct 07, 2013 7:18 pm ]
Post subject:  Re: Opinions needed on engine and transmission mounting

Bunji cords and duck tape or some fab and grade 5 bolts


Water cooled consortium, Chairman of the Build

Author:  giveitagallon [ Mon Oct 07, 2013 9:34 pm ]
Post subject:  Re: Opinions needed on engine and transmission mounting

Attachment:
ImageUploadedByWoodsBuggy1381196005.523819.jpg
ImageUploadedByWoodsBuggy1381196005.523819.jpg [ 78.52 KiB | Viewed 6089 times ]
thanks guys . I ended up just welding a plate behind the tabs and drilling two bolt holes per tab . I was making it harder then it was ! Lol


Posted using the WoodsBuggy Mobile App

Author:  davidk [ Mon Oct 07, 2013 11:09 pm ]
Post subject:  Re: Opinions needed on engine and transmission mounting

Made it removeable I see lol


Posted using the WoodsBuggy Mobile App

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/