This is my custom pig tail exhaust. Its made from a set of vw torque tubes two pieces of straight 2" pipe two 45* bends and two 90* bends and a set of old headers for a chevy i cut small bends off to make the loop. 4 to be exact. Its still rough i have a few small leaks i will weld up and smooth the welds down. I want to wrap it in header wrap. Will it be ok to do this? I will add a tractor flap to keep water out. Plus i like the ting ting ting when its ideling lol. And i will drill a hole in the bottom of the pig tail and thread it for a small screw to drain any water that get in it. What do you guys think for a 20 year old with a sawz all, harbor freight wire welder and a little time to spare lol.

_________________
I may not know alot about working on cars, but I know enough to be dangerous.

Not to shabby that was an interesting idea keep up the good work

_________________
#If the throttle isn't floored, Your NOT havin FUN!!!!#

Never seen the alternator, generator combo before. Make sure you keep an eye on generator. If it doesn't turn you'll lose the fan and melt down. Heat is your enemy on these. If it doesn't turn or slips you could over heat. Just my opinion. Shows some real creativity. good luck and keep up the good work.

Hey that's cool. That aluminized pipe they sell at the store doesn't weld very clean so make sure your cleaning after every pass with a wire brush. Your fitment looks real good!
BTW. I happened to notice your fuel line dangling. I'd take a bout a foot out of that so it doesn't get hooked by something or melt near that new exhaust!

have fun

_________________
has left the building...

Yea ive still got some touch up things to do and the fuel line is on top of a long list ive been working on it every night for about six hours a night ill post more pics of it

_________________
I may not know alot about working on cars, but I know enough to be dangerous.

where are you from?

_________________
If your not God, then don't judge me

That alt came off a purple buggy down that way didn't it? I've seen that before

_________________
IF YA CAN'T RUN WITH IT....RUN FROM IT

Yea it did that was my buddys buggy.



Im from jemison just south of calera. In chilton county.

_________________
I may not know alot about working on cars, but I know enough to be dangerous.

I like it never seen a pig tail before. And like some one already said that fuel line is sketchy to say the least I would also put the filter on the pressure side of the pump. Fuel pumps are not very good suckers.

_________________
If it ain't broke ill fix that

nice gas tank straps should hold up good

Won't you lose low end going with, what is that 2" pipe?

You should atleast have 2 filters one right after the tank and a micron filter on the other side of the fuel pump before the carb

_________________
#If the throttle isn't floored, Your NOT havin FUN!!!!#

i think he said above he only ran the fuel line to get it running he will get it all tight and right befor the woods and i would like to hear how that exaust sounds

_________________


I DO NOT FREE BASE COCAINE

If someone will explain how to post videos i will post one of it running.

_________________
I may not know alot about working on cars, but I know enough to be dangerous.

If you can text it to me I will post it but if your using photobucket for yiur picks it works the same with video

_________________


I DO NOT FREE BASE COCAINE

I hear ya. I've been eating, breathing, sleeping buggy for the last couple months. Thankfully the wife isn't too needy. lol

_________________
has left the building...

Does any one have a set of harnesses they would sell or at least one for a firly reasonable price?

_________________
I may not know alot about working on cars, but I know enough to be dangerous.