WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/
front beam project http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=26&t=15023	Page 1 of 1

---

Author:	hpfreak [ Mon Mar 11, 2013 7:19 pm ]
Post subject:	front beam project
started remanufacturing my front beam. old stuf was rotted pretty good. just some 1" square stock to rebrace it.

---

Author:	hpfreak [ Mon Mar 11, 2013 7:20 pm ]
Post subject:	Re: front beam project

---

Author:	fortydegnorth [ Mon Mar 11, 2013 7:41 pm ]
Post subject:	Re: front beam project
That looks a whole lot better, and stronger

---

Author:	hpfreak [ Mon Mar 11, 2013 7:57 pm ]
Post subject:	Re: front beam project
now i gotta make some shock hoops which means i gotta get new shocks. why is it always a snow ball effect with these damn things?

---

Author:	Red Barron [ Mon Mar 11, 2013 8:16 pm ]
Post subject:	Re: front beam project
Dude don't you know it's 500.00 every time you take something apart.

---

Author:	Psycho Alpha [ Mon Mar 11, 2013 8:26 pm ]
Post subject:	Re: front beam project
I have the same problem lol, I got a deal on coilover shocks and that turned into +6 beam, 4x1 arms, longer link pins, Thur rods, and HD spindles

---

Author:	hpfreak [ Sun Mar 17, 2013 11:33 am ]
Post subject:	Re: front beam project
got the beam done and installed. took me forever to get the arms and spindles clean enough to paint. 40 years of grease buildup gets pretty nasty. durring the process i noticed I have a small amount of slop in my lower beam bushings. how much should i worry about that? gotta fab up some shock mounts. gonna just get some regular gas shocks for now but want to build it to accept maybe air shocks or coilovers later. since i dont have any coilovers to measure from now how long should my length be heim to heim?

---

Author:	jeep534 [ Fri Nov 14, 2014 9:02 am ]
Post subject:	Re: front beam project
Nice job (i want to steal that Idea) archie

---

Page 1 of 1	All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/