see what yall think about these, price dont seem too bad if its a decent bender, 180* dies and supposed to bend 90* in one stroke
https://www.roguefab.com/
http://www.hardlinecrawlers.com/forums/ ... ;topicseen
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| rogue fab tubing bender http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=26&t=14521 |
Page 1 of 1 |
| Author: | ridenrace6 [ Fri Dec 21, 2012 6:32 am ] |
| Post subject: | rogue fab tubing bender |
see what yall think about these, price dont seem too bad if its a decent bender, 180* dies and supposed to bend 90* in one stroke https://www.roguefab.com/ http://www.hardlinecrawlers.com/forums/ ... ;topicseen |
|
| Author: | RogueFab [ Fri Dec 21, 2012 2:18 pm ] |
| Post subject: | Re: rogue fab tubing bender |
RidenRace- It bends 95 degrees on the first stroke, the overtravel past 90 is for springback. We also develop dies in production quantity by request, so let us know if you need a size we don't offer. Hopefully one of our customers is on this board and chimes in with their experience soon 
|
|
| Author: | fortydegnorth [ Fri Dec 21, 2012 4:11 pm ] |
| Post subject: | Re: rogue fab tubing bender |
Looks like a nice bender. |
|
| Author: | RogueFab [ Thu Oct 17, 2013 6:15 pm ] |
| Post subject: | Re: rogue fab tubing bender |
Our customers have been requesting a new video forever... here is a new one: 
|
|
| Author: | diamonddav [ Thu Oct 17, 2013 9:11 pm ] |
| Post subject: | Re: rogue fab tubing bender |
so why dont you become a competitive sponsor against affordable bender and become a sponsor of the site as well  or my money goes to them  just sayin 
|
|
| Author: | MickeyMouse [ Fri Oct 18, 2013 9:17 pm ] |
| Post subject: | Re: rogue fab tubing bender |
I really appreciate that RogueFab is an active member of the Forum and Chris was just asking for opinions.. As for the bender, it looks like a nice bender. I have only used the Affordable Bender and I think the Affordable bender has the benefit of being more mobile and a little easier to set-up. The Affordable Bender is also significantly cheaper. I am sure there are lots of pros and cons to both. I do like the Air option on the RogueFab bender and I think the Block on the end will help with consistent bends if you are trying to bend the exact same thing multiple times. As for the Sponsorship, Yes. Affordable Benders has been a fantastic sponsor of the site. They have donated several benders over the past two years to help raise money for WoodsBuggy.com Events. Most recently, the ride for Bella. We have sent an message to RogueFab to see if they would like to be a sponsor as well. Now back to topic, what do people think of the bender? |
|
| Author: | jrvb [ Sun Oct 20, 2013 8:30 pm ] |
| Post subject: | Re: rogue fab tubing bender |
Looks like a good bender and would work well. I also like the air option as well. Would like to use one to see how easy it is to use. Posted using the WoodsBuggy Mobile App |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|