| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Need Parts Frabricator/Frame Builder Ohio area http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=26&t=13547 |
Page 1 of 1 |
| Author: | nwern2010 [ Sat Apr 21, 2012 1:45 pm ] |
| Post subject: | Need Parts Frabricator/Frame Builder Ohio area |
I have a wrecked frame and Looking for someone who can possibly fix it. I live in Massillon Ohio. |
|
| Author: | budlight1212 [ Sat Apr 21, 2012 2:44 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
call or text kevin at 330 605 4363 from canton ohio |
|
| Author: | nwern2010 [ Sat Apr 21, 2012 3:08 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
|
|
|
| Author: | nwern2010 [ Sat Apr 21, 2012 3:13 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
 image hosting adult |
|
| Author: | nwern2010 [ Sat Apr 21, 2012 3:17 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
 jpg upload |
|
| Author: | nwern2010 [ Sat Apr 21, 2012 3:37 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
| Author: | Odyknuck [ Sat Apr 21, 2012 4:48 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
It can be fixed however it will not be cheap. Maybe its time to rebuild on a new frame. There appears to be a lot of rust in the joint welds. No telling how much it has spread. Food for thought. |
|
| Author: | jayrod [ Sat Apr 21, 2012 5:35 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
Shoot....I seen this buggy they called the duck have some eletrical conduit, Or comparable thickness tubing in the rear cage! Just start burnin those pieces back together and forget about it  . lol  seriously though, Id say that frame is basically trash. Take Ody's advice on that one. 
|
|
| Author: | giveitagallon [ Sat Apr 21, 2012 5:57 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
Yea I'd say new frame to nick ! I heard about that crash and man I'm glad your ok ! |
|
| Author: | Pak Rat 2056 [ Sat Apr 21, 2012 6:16 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
like to clean out my garage, make you a deal on a 4 seater or 1 seater or both  think you know which two I"m talking about
|
|
| Author: | gasman [ Sat Apr 21, 2012 6:46 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
What happened? Man that sucks.unless this is a frame that has a lot of sentimental value than maybe you could build a new one for yourself.looks like the rear housing is tweaked to so unless you put it on a frame machine and twist it and rebuild it it probably wouldn't be right,and then you'll probably need to do a lot of cutting and welding to fix other welds from all the flexing.not saying it couldn't be done but you'll have to get some estimates to see which routes best for you. Chad
|
|
| Author: | JeffClay [ Sat Apr 21, 2012 9:44 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
Yeah, little nick, we need to find you a new frame. I wish I was ready to build a new one right now, but I have no time, i'd make you a killer deal on mine. Ill start looking. |
|
| Author: | nwern2010 [ Sun Apr 22, 2012 1:51 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
Odyknuck wrote: It can be fixed however it will not be cheap. Maybe its time to rebuild on a new frame. There appears to be a lot of rust in the joint welds. No telling how much it has spread. Food for thought. Yeah Kind of had the same feeling. Although I'm not looking for it to be perfect again I wouldn't want to spend more to fix it then I could just get a new frame. I was hoping for a couple new pieces of tubing and welding and it could be usable again. Seem to be though from what you guys are saying it might be "too far gone". The whole rear end is twisted. The motor and tranny were clocked sideways due to something being bent. ( still drove though just could only get it in 2nd). I dont know, guess I'll start tearing it down. Thanks for the opinions guys. Can't wait to be back on the trail again with everyone. |
|
| Author: | Odyknuck [ Sun Apr 22, 2012 5:58 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
Wise decision. Sometimes we get to a point of diminishing returns and have to bite the bullet. This is one of those times. Good luck with the rebuild. |
|
| Author: | hyde [ Sun Apr 22, 2012 7:48 pm ] |
| Post subject: | Re: Need Parts Frabricator/Frame Builder Ohio area |
Odyknuck wrote: Wise decision. Sometimes we get to a point of diminishing returns and have to bite the bullet. This is one of those times. Good luck with the rebuild. X2 |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|