Call pipedope I think he knows the answer to this ( maybe) and if not tell him to hug a root cause he should know,lol. Chad
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 5 lug hub to ball joint spindle http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=26&t=13443 |
Page 1 of 1 |
| Author: | smitty [ Fri Mar 30, 2012 5:18 am ] |
| Post subject: | 5 lug hub to ball joint spindle |
Need to know year that this may have come on(if any) or bearing numbers . Much thanks for any help. |
|
| Author: | gasman [ Fri Mar 30, 2012 10:27 am ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
Call pipedope I think he knows the answer to this ( maybe) and if not tell him to hug a root cause he should know,lol. Chad
|
|
| Author: | kyjr.buggy1 [ Fri Mar 30, 2012 12:57 pm ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
'67 came with wide 5 balljoint hubs. |
|
| Author: | hillaholic [ Fri Mar 30, 2012 1:11 pm ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
Yeah but the 67 spindles are smaller then the newer balljoint spondles. |
|
| Author: | davehix [ Fri Mar 30, 2012 2:39 pm ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
VW Things will work. |
|
| Author: | kyjr.buggy1 [ Fri Mar 30, 2012 2:57 pm ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
Just get late balljoint spuds and weld em on. |
|
| Author: | smitty [ Fri Mar 30, 2012 7:40 pm ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
That what I have, late ball joint spuds welded to king pin. Thing bearings I think is what I need. Thank u all for the help. |
|
| Author: | gasman [ Fri Mar 30, 2012 8:49 pm ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
Front inner bearing type 1&3,69-on #311-405-625B Front outer bearing type 1&3,66-on#311-405-645 front wheel seal type 1&3,66-79 w/disc brake #321-501-641 This is for late model hubs. Not sure this is what you need if you got wide 5 hubs. Ou made need front inner bearing type 1&3,66-68 #311-405-625 front outer bearings the same. Front wheel seal type 1 66-6/68 #131-405-641A Hope this helps. Chad
|
|
| Author: | smitty [ Fri Mar 30, 2012 9:26 pm ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
I have 311405625 and 311405645 both to small. Thanks for looking though |
|
| Author: | JeffClay [ Sun Apr 01, 2012 12:31 pm ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
Smitty, I did this before. I just took some of the 5 lug bearings and some of the 4 lug bearings and made it work, but I don't have the numbers. Im sure I used the bearings off the balljoints and the cups off the kingpin. Roller to cup angle might not have matched perfectly, but I never had an issue and I ran them on and off road for probably 2 years this way... |
|
| Author: | 2800passat [ Thu May 03, 2012 10:31 am ] |
| Post subject: | Re: 5 lug hub to ball joint spindle |
get a drum brake 65 and older type 3. they use the fat shaft newer roller beetle bearings and have that nice "star spoke 5 lug design". |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|