I bought these rotors with new bearing assemblies but need neew trailing arms to use them. Any ideas or advise would be great, I have 2x3's right now and am debating 5x5s with less offset rims.

_________________
[url=http://www.TickerFactory.com/]

[/url]

The arms on my Funco single seater are 4" wider 5" longer. With a set of wheels that have a 5" offset, I won't be any wider than anyone else.

_________________
Of all the things I've lost, I miss my mind the most.
M
A
G
A

I got that part figured, just not sure if I want to build my own arms or buy some that will work on these.

_________________
[url=http://www.TickerFactory.com/]

[/url]

Here is the Company that I believe uses those Aluminum carries:

http://00009q3.previewcoxhosting.com/Re ... gArms.html

Note I had a set of these and decided to go a different route as he uses the stock VW angle on the inner pivot. It tends to make the wheels act like a swing axel setup IMHO. I suppose you could get him to add the 2 or 3 degrees like most manufactures use when they get over stock dimensions like a 2 x 3 or 3 x 3. Personally as hard as you hit trees I would sell those and go with a complete chromoly set of arms from Avery Engineering.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

Lol, thanks Ody, 3 years first hard hit that the tree bars didn't catch. I dont ussuslly drift through the woods.

_________________
[url=http://www.TickerFactory.com/]

[/url]

You don't have to use those bearing housings to run those brakes. You could still run a stock or stock style bearing housing.

_________________
A broken clock is right two times a day.