Time for final welding before paint.

Front end is toed in too far Troy............

Looking good!

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

I would fore go the tubes and form Metal or aluminum in those areas. Its not hard to do and make them removable. It will give you better acces to your brake pedals etc. I did something similar on mine and it worked out well.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

Thanks Odyknuck, But I already went with 1" tubes at an angle. I tried to do the aluminum, but the area is so small with a bad twist I couldnt keep it from buckling or creaseing unless I used a thincker piece then I coulnd get it to twist.

Before paint



After paint



Time To start adding the goodies!!

good lookin frame there ummm hmmm

_________________
Theirs no replacement for displacement !

looking good troy, wont be long now

_________________
Air cooled forever,i hate rusty tools!!!!!!!

looks good the braces on the front look like a sharks gills !

Thanks for all the possitive comments. Got a little more done this week end.

Did you find 100 gallons of purple paint at a surplus yard?

Its not purple. its Navy blue.

Your going to get that question alot. lol

You're not fooling anyone

looks very good!

_________________
lets just ride

Looking good Troy!

_________________
When in doubt, Hit the Gas!!!!!!!

My build, http://www.woodsbuggy.com/index.php?opt ... =23&t=9147

In person it don't look puple.



Next is the pink body panels

Looking very good. Those front treads are certainly gonna throw the mud your way. Try to remember to keep your mouth shut if you can while riding that thing.

Almost done.

thems some fancy seat covers ya got there. haha. Looks good though man

Great job on the build!! I better kick it in gear so we can all ride together!

_________________
When in doubt, Hit the Gas!!!!!!!

My build, http://www.woodsbuggy.com/index.php?opt ... =23&t=9147

Man that thing looks killer! I love the trunk lid.... very good job I have to admit I wasnt diggin' the diagonal bars in the front but now that they are done they look really cool !

Thanks guys, I have to put in a few more body panels, the engine, and a good once over to make sure everythings tight, and I should be done, or ready to ride, I'm sure it'll never be done.

great job on the build , on all the detail you have put on your buggy i do have to ask on your light bar the cool little skull you put up their does his eyes glow cause that would be and another nice added touch like the struts on the back engine deck lid . jason

_________________
Theirs no replacement for displacement !

whats up with the axe troy? you sending me a message

_________________
Air cooled forever,i hate rusty tools!!!!!!!

Yes they do. I have them on a swith where just they will come on.




Yep, run over me with your buggy now, and you may not make it out of the woods