| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Codename: Mini http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=5906 |
Page 1 of 1 |
| Author: | Kyle [ Tue Feb 24, 2009 10:57 pm ] |
| Post subject: | Codename: Mini |
Here is the mini rail we are building. Started life as a 300ex. Its coming along good we got the cage and suspension done finally. Steering and shifting tomorrow. Its for my buddies 10 year old, and we put the seat on sliders so the big boys can get in to.       
|
|
| Author: | fortydegnorth [ Tue Feb 24, 2009 11:24 pm ] |
| Post subject: | Re: Codename: Mini |
Good thing the seat moves because when the kids outgrow it you can slap a Hayabusa in there and let it rip. 
|
|
| Author: | Kyle [ Wed Feb 25, 2009 12:44 am ] |
| Post subject: | Re: Codename: Mini |
hehe that might not be far off. only problem is reverse, the 300ex has it thats why its used 
|
|
| Author: | Odyknuck [ Thu Feb 26, 2009 12:49 pm ] |
| Post subject: | Re: Codename: Mini |
The Hyabusa woulds require a F-N-R gearbox and a CVT setup to work and have reverse. It would also be way way to much power for what you are building lol. |
|
| Author: | Kyle [ Thu Feb 26, 2009 12:53 pm ] |
| Post subject: | Re: Codename: Mini |
Way to much power? Whats that Ody hahaha! The frontend is light so it should be a stander |
|
| Author: | Odyknuck [ Thu Feb 26, 2009 4:29 pm ] |
| Post subject: | Re: Codename: Mini |
Did I say that ? Hmm! I must of had a senior moment 
|
|
| Author: | Kyle [ Fri Feb 27, 2009 11:01 am ] |
| Post subject: | Re: Codename: Mini |
No reverse on the 400 either which would suck. If you just chop the frame on the 300 right at the motor then build the cage around it then the swingarm and chain etc lines up perfectly because its stock 300 stuff. We are hoping to have it all done this weekend, got a few more bars to weld in and get the shifter, throttle, etc hooked up. We made it a roller last night. I am sure you could prolly come up with something even better than what we are working on. Kyle |
|
| Author: | instigator [ Sat Feb 28, 2009 9:02 pm ] |
| Post subject: | Re: Codename: Mini |
i'm hijacking this for a post.  When i first built this for my kids. i built it just for them. one day everyone was gone and i thought i'm going to drive this thing if its the last thing i do today. so i sqeeze in. got the ride in . i could not get out.( picture a 180lb man sqeezed into this) i was luck when i pulled back in to the garage there was a pair of visegrips plies laying inthe floor. i had to take the whole steering apart to get out. so a word to the wise always make them big enough for you to drive first. |
|
| Author: | frankenbuggy06 [ Sun Jun 28, 2009 8:29 am ] |
| Post subject: | Re: Codename: Mini |
Any more on this thing kyle? |
|
| Author: | buggyroy [ Mon Jun 29, 2009 11:49 am ] |
| Post subject: | Re: Codename: Mini |
we have had other things to do. still looks the same need to finsh |
|
| Author: | Kyle [ Tue Jun 30, 2009 10:12 am ] |
| Post subject: | Re: Codename: Mini |
yea 3 buggies and a couple powerstrokes |
|
| Author: | Jarhead [ Sun Jul 19, 2009 7:13 pm ] |
| Post subject: | Re: Codename: Mini |
I have a nice powerplant for that !! it s a Cbr 600 f4i with everything to swap it in!!!! |
|
| Author: | perrib [ Wed Jul 22, 2009 10:43 pm ] |
| Post subject: | Re: Codename: Mini |
Looking good. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|