I found some one that would do it
i have to take it there tomorow and i may get some bracing put in i don no yet ill try in get some pics up of it so i can get yalls input on things
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Need some help http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=4928 |
Page 1 of 1 |
| Author: | Jonathan [ Tue Oct 21, 2008 10:12 pm ] |
| Post subject: | Need some help |
Well my buggy is almost done i just need to weld on tabs to mount oil cooler and oil filter too except i dont know how to weld..... |
|
| Author: | Jonathan [ Wed Oct 22, 2008 4:48 pm ] |
| Post subject: | Re: Need some help |
Would it be ok to run bolts straight through my frame? |
|
| Author: | DVS1 [ Wed Oct 22, 2008 4:54 pm ] |
| Post subject: | Re: Need some help |
Drilling holes and bolting something to it would weaken the frame in those spots. I personally don't recommend it because of weakening the frame and that would let water in and rust from the inside out. Ask some of your friend or maybe someone from the site to help you weld tabs in. I would be glad to help you but your probably too far away from me. |
|
| Author: | Jonathan [ Wed Oct 22, 2008 5:01 pm ] |
| Post subject: | Re: Need some help |
Yeah pittsburg would be a long drive lol i recon i just cant get in a hurry lol its all i need to get this thing goin but ima wait it out and do it right ty for the advice |
|
| Author: | wildwillie [ Wed Oct 22, 2008 5:31 pm ] |
| Post subject: | Re: Need some help |
try a local muffler shop |
|
| Author: | Jonathan [ Wed Oct 22, 2008 6:55 pm ] |
| Post subject: | Re: Need some help |
I found some one that would do it i have to take it there tomorow and i may get some bracing put in i don no yet ill try in get some pics up of it so i can get yalls input on things
|
|
| Author: | DVS1 [ Wed Oct 22, 2008 6:59 pm ] |
| Post subject: | Re: Need some help |
Take advantage of the opportunity. Make gussets, braces and other things that you want welded so it can all get done tomorrow. Oh, and do a quick check on all the welds so if any need fixed that can be done too. Good luck and keep us posted. |
|
| Author: | Jonathan [ Wed Oct 22, 2008 7:17 pm ] |
| Post subject: | Re: Need some help |
ok im fixin to head to the shop now and try in get a few pics |
|
| Author: | Odyknuck [ Wed Oct 22, 2008 9:00 pm ] |
| Post subject: | Re: Need some help |
Here is a good place to get just about any tab or bracket you need at very reasonable prices. Why make them when you can buy them cheap. aa-mfg.com |
|
| Author: | countri boy 84 [ Wed Oct 22, 2008 10:46 pm ] |
| Post subject: | Re: Need some help |
Hey man I live in Dora just a few minutes from you my buddy has a welder and what ever you need next time you need help just call you bring the beer well burn it on. CLIFF, 205-413-0608 Give me a call when you get it done and well do some ridin I'm about done with mine as well.. |
|
| Author: | Jonathan [ Thu Oct 23, 2008 12:30 am ] |
| Post subject: | Re: Need some help |
i might have to take ya up on that countryboy when this one is done i think ima go straight into building another one |
|
| Author: | countri boy 84 [ Thu Oct 23, 2008 8:17 pm ] |
| Post subject: | Re: Need some help |
Give me a holler and well help all we can. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|