basic stock stuff but more to come hopefully
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| my buggy and the slow an lil progress it makes http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=4447 |
Page 1 of 1 |
| Author: | 1veryfastvr4 [ Wed Aug 13, 2008 4:49 pm ] |
| Post subject: | my buggy and the slow an lil progress it makes |
basic stock stuff but more to come hopefully
|
|
| Author: | TrackerCasey [ Wed Aug 13, 2008 4:57 pm ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
Whats the wheel base on that thing? it looks like a wheelie machine!! |
|
| Author: | Bad Influence [ Wed Aug 13, 2008 5:03 pm ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
Cool pics!! Thanks for postin |
|
| Author: | cyle [ Wed Aug 13, 2008 8:47 pm ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
i know it runs good seen it at the tough truck race fri. night |
|
| Author: | 1veryfastvr4 [ Wed Aug 13, 2008 8:54 pm ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
just walked out to measure 78'' lol almost as long as wide 
|
|
| Author: | Kyle [ Wed Aug 13, 2008 9:24 pm ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
78 holy hell batman. cool lookin bet its real fun in the tight stuff. |
|
| Author: | mudd mutt [ Thu Aug 14, 2008 3:50 am ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
Yea I seen that buggy at Croton looks like you had fun! We'll have to go ridin some time. |
|
| Author: | 1veryfastvr4 [ Thu Aug 14, 2008 11:54 am ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
havent had it on anything to steep yet but hopefully soon |
|
| Author: | jacobnhra [ Fri Aug 15, 2008 7:27 am ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
Ittle be a fun woods buggy |
|
| Author: | 1veryfastvr4 [ Sat Sep 13, 2008 8:57 am ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
    added couple things |
|
| Author: | Odyknuck [ Mon Sep 15, 2008 10:56 am ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
Coming together. A few words of advise. If you need to drill thru the frame tubing you should weld sleeves in the hole so the bolts dont crush the tubing and become loose. Also this retains the strengh and stops water from entering the tube and rust it out. |
|
| Author: | 1veryfastvr4 [ Tue Sep 16, 2008 11:35 am ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
good idea, i might give it a whirl when i pull it apart.... what do you use to sleeve it? conduit is prob way to big....not sure what else to use |
|
| Author: | Odyknuck [ Tue Sep 16, 2008 12:49 pm ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
You can buy tubing in various sizes. Get tubing with an ID a little larger than the bolts you are using. Another approch that would be less work is to weld tabs on the tube to bolt your plates too. That way your not drilling thru the Tubing. AA-MFG.com is a good place to get tabs. They are prety cheap on pricing. Heres a link right to the tabs: http://www.aa-mfg.com/pdshop/shop/categ ... x?catid=10 |
|
| Author: | 1veryfastvr4 [ Tue Sep 16, 2008 1:53 pm ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
thank you for link, ill keep that in mind and poss try and weld the holes shut this winter and then convert over to tabs like you talkd about, i was using 5/16'' bolts so i could check lowes or somewhere for pipe like that |
|
| Author: | TrackerCasey [ Tue Sep 16, 2008 8:46 pm ] |
| Post subject: | Re: my buggy and the slow an lil progress it makes |
1veryfastvr4 wrote: thank you for link, ill keep that in mind and poss try and weld the holes shut this winter and then convert over to tabs like you talkd about, i was using 5/16'' bolts so i could check lowes or somewhere for pipe like that Not Pipe!!! Tubing, there is a difference go to a steel supplier I'm sure if you look you can find one local if you can't find a local one contact your local High school metal fab teacher and see where they buy steel. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|