basic stock stuff but more to come hopefully

Whats the wheel base on that thing? it looks like a wheelie machine!!

Cool pics!! Thanks for postin

_________________
Bryan

i know it runs good seen it at the tough truck race fri. night

just walked out to measure 78'' lol almost as long as wide

78 holy hell batman. cool lookin bet its real fun in the tight stuff.

_________________
2332cc Air Cooled Screaming Meanie. Predator Singleseat.

"Lets go get stupid"

Yea I seen that buggy at Croton looks like you had fun! We'll have to go ridin some time.

havent had it on anything to steep yet but hopefully soon

Ittle be a fun woods buggy

_________________
Every man loves a set of TWINS especially sitting on a dragster

added couple things

Coming together. A few words of advise. If you need to drill thru the frame tubing you should weld sleeves in the hole so the bolts dont crush the tubing and become loose. Also this retains the strengh and stops water from entering the tube and rust it out.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

good idea, i might give it a whirl when i pull it apart.... what do you use to sleeve it?

conduit is prob way to big....not sure what else to use

You can buy tubing in various sizes. Get tubing with an ID a little larger than the bolts you are using. Another approch that would be less work is to weld tabs on the tube to bolt your plates too. That way your not drilling thru the Tubing. AA-MFG.com is a good place to get tabs. They are prety cheap on pricing.
Heres a link right to the tabs:
http://www.aa-mfg.com/pdshop/shop/categ ... x?catid=10

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

thank you for link, ill keep that in mind and poss try and weld the holes shut this winter and then convert over to tabs like you talkd about, i was using 5/16'' bolts so i could check lowes or somewhere for pipe like that

Not Pipe!!! Tubing, there is a difference go to a steel supplier I'm sure if you look you can find one local if you can't find a local one contact your local High school metal fab teacher and see where they buy steel.