Beautiful,,,inspiring,,,please keep the pic's coming....? are those 930 joints?,,,

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

Yes, those are 930 joints that Nick lightened. Drews off -Road should have my axles and CV's in on Wednesday.

I picked up the axles, boots, and cvs today.... Back to work!

_________________
Maybe you should chug on over to mamby pamby land....

Nick you have a pm

Well, we got the motor and trans mounted, cv's figured out, with around 20" of rear wheel travel, the cv joint never sees over 22 degrees. That is sweet!


kevin took the car home with him to take care of some of the tabs, and this and that, witch will give me some time to start on the woods car and work on my race car

_________________
Maybe you should chug on over to mamby pamby land....

The buggy trailer is for sale . Buit in 04 all new metal 15"tires @ rims 3000pound axel@ jack .Deck is 7ft4 by 15 .$1200 812-584-7644 Kevin

new Beard ultra-pro seat showed up yesterday I LOVE that seat! I'll get some pics up.

_________________
Maybe you should chug on over to mamby pamby land....

Finally, the front brakes arrived!

_________________
Maybe you should chug on over to mamby pamby land....

The best seat I have found so far!

_________________
Maybe you should chug on over to mamby pamby land....

So,when's the obviously needed garage sale going on? Got my eye on that slick bender.Very nice build dude.

_________________
piggnuts say, crowded elevator smell very different to midget

Thanks man! I don't see a garage sale happening unless I die somehow!

_________________
Maybe you should chug on over to mamby pamby land....

Well not dun yet.Bezzzzzzzzzzzzzzzy building Nicks engine & dynoing at Satlers .DREWS has my transmission stell welding & grinding wating on $$$$$$$$$$$$$$$$$$$

Kevin, You going to be ready for Casey??

Well Wyoming i am tring trans is a part engine needs look at car not dun need tires need need need A SPONSER AND $$$$$$$$$$ BUT IM READY

Hyde, Do not let tires stop you I have a set of X tracks on five lug jackman rims for rears and I have a set of unmounted used front tires like the ones on my car. The fronts are for sale or trade and the rears are like new and you are welcome to use them for a race or two. If push come to shove you can use the fronts off of my woods buggy they havent seen the road in like 10 years and are practically new (5 lug also). Let me know I will be in next week.

Thanks i hope not got trans bake from DREWS thanks to Brian .

My next car will be a-arm and hopefully look as good as that! Almost cut the front off mine and converted it. Your work looks GREAT! Love it! Maybe you should just keep that one and give me the yellow car. California asked me friday when I was coming out to run score series haha!

_________________
Boyd Jordan
~< Rob Herring Pit Crew Chief >~
Memphis TN - - - http://www.facebook.com/profile.php?id=840280415

HA!, yea, they called you too? I told them not to bother me while I am eating dinner! I am in the middle of preping my car, and everything that is holding me up is! I wanted to be done with it this coming weekend so we can wrap up the A-arm car, but looks like that chance is dwindiling. I'm still waitin on my new fuel cell..

_________________
Maybe you should chug on over to mamby pamby land....

Haha I told them I was going to pick up this good lookin yellow car up in Ohio and I was headed to california. Must need fuel cell to have all the right measurments to get it all wired up and plumbed. Well and you need some place to put gas haha. That first big race is coming up!

_________________
Boyd Jordan
~< Rob Herring Pit Crew Chief >~
Memphis TN - - - http://www.facebook.com/profile.php?id=840280415

Well how about a progress report!!! or a congress report if the case may be. I would like to swing by next week and take a look.

Wyoming When are you comeing in. You can come out anytime, but it is 50 miles from Brians.

I am leaving today I have to go look at a job then I am gone. Leaving here and heading to Ga. then north to Brians I have a pretty full week but I want to come take a look I will try to talk Brian in to comming as far as the 50 miles thats a drop in the bucket I have to go that far to get grocreys. I will give you a jingle when I get in.

The a-arm frame stopped down to visit me over the weekend, so I got a few pics. If all the plans comes together, it will be out at Drews Swap meet this weekend!

_________________
Maybe you should chug on over to mamby pamby land....

building the body this weekend. front bumper, rear cage, and "tree" bars done. I havn't even seen them yet as I have been too busy with my buggy. Hope to have the body done for the swap- meet.

_________________
Maybe you should chug on over to mamby pamby land....

Built the body in about 9 hours. Didn't bead-roll the sides yet. Still needs a firewall. It was up at Drews for the swap meet, and if you saw it, the body still has the plastic on it thats why it looks like it already ran 5 races


I parked it next to my car for a few pics (yesterday was my buggys first birthday )

_________________
Maybe you should chug on over to mamby pamby land....