WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

My new to me buggy
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=17768		 Page 1 of 1
Author:  streetstock174 [ Mon Apr 27, 2015 8:28 pm ]
Post subject:  My new to me buggy
Went searching for a 4 seater so would have something for the kids to price around in.

Anyways, ended up buying a 4 seater Beeline Cobra (I think). Has a 3 rib, believe the motor is stock, with a weber progressive carb. Looks front heavy, but it actually isn't.

Image

Image

Last pic is in Racefreak J77's garage for alittle maintenance and a couple upgrades.

Went to adjust the torsion Sunday, and upon pulling off the trailing arms, discovered the drivers side was cracked from one side to the other. Good thing I had a set....
Author:  aboone993 [ Mon Apr 27, 2015 8:57 pm ]
Post subject:  Re: My new to me buggy
Nice . I will be looking for it at lbl
Author:  streetstock174 [ Mon Apr 27, 2015 9:31 pm ]
Post subject:  Re: My new to me buggy
aboone993 wrote:
Nice . I will be looking for it at lbl


It'll be there Memorial weekend. Gonna be there?
Author:  aboone993 [ Mon Apr 27, 2015 9:44 pm ]
Post subject:  Re: My new to me buggy
Planning on it .
Author:  racefreakj77 [ Tue Apr 28, 2015 1:54 pm ]
Post subject:  Re: My new to me buggy
looking forward to seeing yall chris and damn i love messing with these things.
Author:  streetstock174 [ Tue Apr 28, 2015 7:37 pm ]
Post subject:  Re: My new to me buggy
Maybe someone on here can provide some insight. Took the rear suspension apart to replace the arms. The drivers side stub axle will not come out of the spindle/hub. Make a long story short, while using a big press, the spindle/hub broke. Now I need to find another, but have no clue what it might have come off of. It is just a spindle with the splines on the inside, and the wheel studs. No drum or rotor. The rotor is a slip on, similar to most cars. Any thoughts on what to look for?
Author:  riverar321 [ Tue Apr 28, 2015 8:06 pm ]
Post subject:  Re: My new to me buggy
The most common setup that I know of is type 3 hubs turned down a bit to fit Porsche 914 rotors. That being said, my buggy had some other slip on rotor when I bought it.
Author:  riverar321 [ Tue Apr 28, 2015 8:08 pm ]
Post subject:  Re: My new to me buggy
After looking at your picture, I'm sure that you have the 914 rotors.
Author:  JoeBob24 [ Tue Apr 28, 2015 10:10 pm ]
Post subject:  Re: My new to me buggy
I am looking for a pair of rims like what you have on the front of your buggy, any ideas on where I might find some ?
Author:  Psycho Alpha [ Tue Apr 28, 2015 10:11 pm ]
Post subject:  Re: My new to me buggy
Summit racing on rims
Author:  streetstock174 [ Wed Apr 29, 2015 4:16 pm ]
Post subject:  Re: My new to me buggy
JoeBob24 wrote:
I am looking for a pair of rims like what you have on the front of your buggy, any ideas on where I might find some ?


I know Appletreeauto.com has them as well.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/