WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
Buggy Rebuild http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=17628 |
Page 1 of 2 |
Author: | Gavey [ Sat Jan 31, 2015 12:05 pm ] |
Post subject: | Re: Buggy Rebuild |
Author: | Gavey [ Sat Jan 31, 2015 12:39 pm ] |
Post subject: | Re: Buggy Rebuild |
I set the beam at 8 degrees |
Author: | diamonddav [ Sat Jan 31, 2015 3:43 pm ] |
Post subject: | Re: Buggy Rebuild |
did you buy that buggy from jeff in blue ash? |
Author: | Pettigo [ Sat Jan 31, 2015 4:10 pm ] |
Post subject: | Re: Buggy Rebuild |
Looks good |
Author: | Gavey [ Sat Jan 31, 2015 7:56 pm ] |
Post subject: | Re: Buggy Rebuild |
sure did |
Author: | diamonddav [ Sat Jan 31, 2015 9:42 pm ] |
Post subject: | Re: Buggy Rebuild |
rite on, hes a friend of ours, that buggy just got redone like 2 years ago,enjoy man. im sure we'll see you out on the trails. |
Author: | darrell [ Mon Feb 02, 2015 2:36 am ] |
Post subject: | Re: Buggy Rebuild |
I built the motor. .2387 needs a better set of heads on it ..Good motor tho everything was new but the heads and carbs |
Author: | darrell [ Mon Feb 02, 2015 2:38 am ] |
Post subject: | Re: Buggy Rebuild |
Buggy need a six rib also that 5 won't last long |
Author: | Gavey [ Mon Feb 02, 2015 4:47 pm ] |
Post subject: | Re: Buggy Rebuild |
I picked up a 6 rib side shift a couple weeks ago to put in it. For now I'm just going to port on the heads |
Author: | Gavey [ Thu Feb 12, 2015 7:39 am ] |
Post subject: | Re: Buggy Rebuild |
Thanks Hyde for the balancing work. We should have the heads ready for you next week. Buggy is back on all four. Working on re mounting the bus steering box. In the middle of working on the motor. |
Author: | Gavey [ Tue Feb 17, 2015 11:10 pm ] |
Post subject: | Re: Buggy Rebuild |
I got the new steering box mount and shaft all reworked |
Author: | Gavey [ Tue Feb 17, 2015 11:25 pm ] |
Post subject: | Re: Buggy Rebuild |
We are almost done with porting the heads thanks to Eric. Next the are off to have a valve job done with new intake valves. |
Author: | Gavey [ Tue Feb 17, 2015 11:28 pm ] |
Post subject: | Re: Buggy Rebuild |
started building my dry sump tank |
Author: | Gavey [ Sun Feb 22, 2015 11:25 pm ] |
Post subject: | Re: Buggy Rebuild |
finished front end up today |
Author: | NRIbuggys [ Mon Feb 23, 2015 11:48 am ] |
Post subject: | Re: Buggy Rebuild |
Lookin good |
Author: | Cush53 [ Mon Feb 23, 2015 7:53 pm ] |
Post subject: | Re: Buggy Rebuild |
Looks good, what's the steering box out of, and is it a power box |
Author: | Gavey [ Tue Feb 24, 2015 11:03 pm ] |
Post subject: | Re: Buggy Rebuild |
Thanks guys the steering box is out of a Vw bus. It is manual. |
Author: | Pettigo [ Tue Feb 24, 2015 11:49 pm ] |
Post subject: | Re: Buggy Rebuild |
Post a few pics of the steering box and how you assembled it. Just curious how it mite work |
Author: | Pettigo [ Wed Feb 25, 2015 12:48 pm ] |
Post subject: | Re: Buggy Rebuild |
Thanks |
Author: | Gavey [ Thu Mar 12, 2015 9:31 pm ] |
Post subject: | Re: Buggy Rebuild |
I extended my frame horns 1" and finished mounting the new transaxle |
Author: | Gavey [ Thu Mar 12, 2015 9:38 pm ] |
Post subject: | Re: Buggy Rebuild |
I finished up my side shift linkage last night |
Author: | jimp [ Fri Mar 13, 2015 6:22 am ] |
Post subject: | Re: Buggy Rebuild |
Nice work! Do you still have a list of parts (heim joints, shafts, etc.) and dimensions for the trans shifter and front mount? I can open any CAD files that you may have. |
Author: | Gavey [ Fri Mar 13, 2015 6:56 am ] |
Post subject: | Re: Buggy Rebuild |
Thanks. My parts are all hand made card board cut outs for templates I used 9/16 stainless shaft and a piece of stainless tubing with brass bushings to make it the heim joint is 1/2" |
Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |