WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Kayla's Buggy Mod
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=13021		 Page 1 of 1
Author:  nitro_mudder [ Sun Jan 22, 2012 5:03 pm ]
Post subject:  Kayla's Buggy Mod
This was Sept 2010 BOTM then Troy sold it to us so he could start some new projects. He did a great job on the frame and accessories on this buggy. But now it is time to give it as giveitagallon would say......pa pa pa power! Right now the plan is to install the ecotec and 6 rib, 2x3 or maybe 5x7 trailing arms. 930's and upgrade the pedal assembly to my old CNC setup. Right now I have time and no budget for parts, and soon I will be able to buy parts and have no time to install, par for the course! I will update you all as I go.
Image
Author:  nitro_mudder [ Sun Jan 22, 2012 6:03 pm ]
Post subject:  Re: Kaylas Buggy Mod
Well the first headache I have noticed allready is that I need to cut the rear of the cage open to be able to put the engine in, lol. Also forgot to mention It is getting power steering via a chevy truck box as well.

Still havnt figured out what I am doing for the harness just yet. Do it myself or pay to have it done. Any advise guys that have done this?
Author:  MickeyMouse [ Sun Jan 22, 2012 6:33 pm ]
Post subject:  Re: Kaylas Buggy Mod
Why ruin a perfectly good AC buggy? :twisted: :twisted: :twisted: :twisted:
Author:  Ibanidiot2 [ Sun Jan 22, 2012 7:40 pm ]
Post subject:  Re: Kaylas Buggy Mod
What year ecotec are you planning to use?
Author:  nitro_mudder [ Sun Jan 22, 2012 8:01 pm ]
Post subject:  Re: Kaylas Buggy Mod
Ibanidiot2 wrote:
What year ecotec are you planning to use?


Its an 05 from a cavalier.

And Dan if I could afford a stroker and a tech to follow her around and clean and tune carbs then It would stay air-cooled. :mrgreen:
Author:  Ibanidiot2 [ Sun Jan 22, 2012 8:05 pm ]
Post subject:  Re: Kayla's Buggy Mod
You should find most of what you need here. http://www.woodsbuggy.com/index.php?opt ... 18&t=11571
Author:  jesse [ Sun Jan 22, 2012 9:17 pm ]
Post subject:  Re: Kayla's Buggy Mod
Quote:
And Dan if I could afford a stroker and a tech to follow her around and clean and tune carbs then It would stay air-cooled. :mrgreen:


havent touched my carbs or had problems with my motor and i been running it 2 years now sorry cleanda idle jet one time but other than that :mrgreen:
Author:  giveitagallon [ Sun Jan 22, 2012 9:56 pm ]
Post subject:  Re: Kayla's Buggy Mod
Sweet looking buggy ! Get as much as ya can before ya hit the road ! I would focus on teaching your daughter some man skills . Lol meaning getting her hands dirty !
And I'm sure that Eco will pa pa pa power that thing just fine ! :wink:
Keep the pics coming .
Author:  nitro_mudder [ Sun Jan 22, 2012 10:28 pm ]
Post subject:  Re: Kayla's Buggy Mod
jesse wrote:
Quote:
And Dan if I could afford a stroker and a tech to follow her around and clean and tune carbs then It would stay air-cooled. :mrgreen:


havent touched my carbs or had problems with my motor and i been running it 2 years now sorry cleanda idle jet one time but other than that :mrgreen:


Not saying it doesnt happen, just that I can't do it with my current skills. And so far my lawn mower runs fine so no need to learn carbs :mrgreen:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/