| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| GIVEITAGALLONS WINTER PROJECT http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=12743 |
Page 1 of 3 |
| Author: | giveitagallon [ Thu Dec 08, 2011 8:23 pm ] |
| Post subject: | GIVEITAGALLONS WINTER PROJECT |
|
|
|
| Author: | nitro_mudder [ Thu Dec 08, 2011 8:31 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Good luck getting it as pretty as it was before  What engine this time around?
|
|
| Author: | giveitagallon [ Thu Dec 08, 2011 8:44 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
its getting a suby , and it will look like new when im done with it only thing im not fixing is the  cage bend from a rollover !
|
|
| Author: | Odyknuck [ Thu Dec 08, 2011 9:06 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
And your not fixing the rear cage , WHY?   
|
|
| Author: | gasman [ Thu Dec 08, 2011 9:15 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Take plenty of pics of how you mount your trans.I see you've cut your frame horns in half.so are you just going to mount it from the top?just curious.Chad
|
|
| Author: | hillaholic [ Thu Dec 08, 2011 9:44 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Holy... That looks too easy. You'll have it done by this weekend. |
|
| Author: | nitro_mudder [ Thu Dec 08, 2011 9:55 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Wow I thought gasman died! frame looks good too
|
|
| Author: | DVS1 [ Fri Dec 09, 2011 2:52 am ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
giveitagallon wrote: its getting a suby , and it will look like new when im done with it only thing im not fixing is the cage bend from a rollover !who's the idiot that rolled it? |
|
| Author: | afterburnt [ Fri Dec 09, 2011 8:41 am ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
i know where you can get a bad ass front end and some rear arms.
|
|
| Author: | giveitagallon [ Fri Dec 09, 2011 9:11 am ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Ody the rear cage will get fixed up it's the roof that is dented down and dave had it buzzards so well it apppears a porta power would not correct it but it is fine the way it is . Gasman I don't think I would call it to custom just working with what I have on the rear torsion to give me a little room for whats going in there . Afterburnt , I'll be at your place at 6 to pickup my Christmas presents !  And dvs1 I won't answer that all I will say is put a dave were you wrote who's lol I'll keep the pics coming ! Oh afterburnt we need to post some pics of the front ends Your building since there a little different then the other one ya built ! |
|
| Author: | gasman [ Sat Dec 10, 2011 9:52 am ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
I've got two buggies that have the frame horns broke right under the cv.I was just wandering what you were going to do to yours.chad
|
|
| Author: | madskills [ Sat Dec 10, 2011 6:19 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
I love it. I need a two seater bad |
|
| Author: | giveitagallon [ Wed Dec 28, 2011 3:36 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
   here is all i was able to get done due to the wifey grounding me from the garage so much .
|
|
| Author: | gasman [ Wed Dec 28, 2011 8:15 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Seems like you never get enough time when you need it.keep the pics coming.Chad
|
|
| Author: | nitro_mudder [ Thu Dec 29, 2011 1:06 am ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Should do the trick...keep it moving. |
|
| Author: | giveitagallon [ Sat Feb 04, 2012 4:02 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
    
|
|
| Author: | plumberbill [ Sun Feb 05, 2012 12:01 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
nice job jason, keep the pics coming. |
|
| Author: | hermie250 [ Mon Feb 06, 2012 6:24 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
u might have a slight feul leak  ... lol
|
|
| Author: | aboone993 [ Mon Feb 06, 2012 8:39 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Looks good man . |
|
| Author: | nitro_mudder [ Wed Feb 08, 2012 8:44 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
That slave cylinder better be worth it, lol. Lookin good though. |
|
| Author: | giveitagallon [ Sun Mar 25, 2012 7:05 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
     front ends that are being built by aftrerburnt (LIMITED EDITION  ) FRONT HUBS before after    building some rear trailing arms over at daves      
|
|
| Author: | nitro_mudder [ Sun Mar 25, 2012 7:36 pm ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Gettin close, better get it done or you will be ridding with one of us
|
|
| Author: | plumberbill [ Mon Mar 26, 2012 8:48 am ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
looking good!!!!! |
|
| Author: | davehix [ Mon Mar 26, 2012 9:08 am ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Looking good! |
|
| Author: | Odyknuck [ Mon Mar 26, 2012 10:40 am ] |
| Post subject: | Re: GIVEITAGALLONS WINTER PROJECT |
Nice work, keep it coming. |
|
| Page 1 of 3 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|