| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Round 3 http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=11465 |
Page 1 of 1 |
| Author: | Blueyedevil [ Fri Mar 25, 2011 9:57 pm ] |
| Post subject: | Round 3 |
I've owned it for 9 years and this is the 3rd time its been took apart and upgraded. Im putting a acw 6 rib in it, suspension seats, cut firestones, adding front shock mounts, saco rack, tweed stock height combo spindles, fk rod ends, msd distributor and adding side panels. I hope to have it ready by the end of april, I didnt pull it out of the garage last year and am determined to go riding this year ![]() ![]() ![]() ![]() ![]() ![]() ![]()
|
|
| Author: | giveitagallon [ Sat Mar 26, 2011 8:42 am ] |
| Post subject: | Re: Round 3 |
great looking buggy ! cant go wrong with round 3 mods your doing ! did you not like the drop spindles on the kp ? Jason |
|
| Author: | Blueyedevil [ Sat Mar 26, 2011 11:18 am ] |
| Post subject: | Re: Round 3 |
They were fine when i was running 5.00x15 but i prefer a taller front tire, it sits level with engine, trans, and fuel with the boggers but im going to run firestones this year and am already at about 40% droop in the front with the coilovers adjusted as low as they will go. |
|
| Author: | A. Cole [ Sat Mar 26, 2011 11:23 am ] |
| Post subject: | Re: Round 3 |
Sweet! |
|
| Author: | ridenrace6 [ Mon Mar 28, 2011 12:27 am ] |
| Post subject: | Re: Round 3 |
nice buggy but i want to seen some pics of the 6? chevy in the background of the 1st pic |
|
| Author: | Blueyedevil [ Sun Apr 24, 2011 3:38 am ] |
| Post subject: | Re: Round 3 |
Progress pics ![]() ![]() ![]()
|
|
| Author: | gasman [ Sun Apr 24, 2011 9:09 am ] |
| Post subject: | Re: Round 3 |
Great looking buggy! Out of all the mods you made I say putting those seats in it will be what you will like the most.going from poly seats to suspension seats is like going from riding a five gallon bucket to riding a Cadillac,lol.looks good though just enough bling to make that black frame stand out.Chad |
|
| Author: | DVS1 [ Sun Apr 24, 2011 9:27 am ] |
| Post subject: | Re: Round 3 |
Dude! Thats is a sweet looking buggy! When your done you oughtta submit it for Buggy of the Month. |
|
| Author: | A. Cole [ Sun Apr 24, 2011 9:35 am ] |
| Post subject: | Re: Round 3 |
Thats a good looking buggy! |
|
| Author: | Blueyedevil [ Sun Apr 24, 2011 8:31 pm ] |
| Post subject: | Re: Round 3 |
Thanks guys, i hope to have it finished by mid may but i still have a hundred small things to do. I didnt plan far enough ahead on the combo spindles and ended up putting jamar front brakes, somehow i decided that kingpin rotors would fit combo spindles without doing the research, expensive mistake. I wanted to do an x brace and a few other changes to the frame befor i put the seats in but looks like thats a project for this winter along with fuel injection and a dry sump setup lol. ![]() ![]() ![]() ![]() ![]() ![]()
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|