WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

ky cookie cutter build
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=23&t=10943		 Page 1 of 2
Author:  jessielee [ Fri Dec 31, 2010 9:33 pm ]
Post subject:  ky cookie cutter build
i picked up a frame last week and i got it painted today, im going to start putting it together tomorrow so ill post pics as soon as i can
im so excited :mrgreen:
Author:  MickeyMouse [ Fri Dec 31, 2010 9:39 pm ]
Post subject:  Re: ky cookie cutter build
Congrats on the new frame...

Wow.. you already got it painted.. Have you already finished the fabrication? if not, you will probably need some touch up paint before you are finished.

Keep the pics coming
Author:  jessielee [ Fri Dec 31, 2010 9:45 pm ]
Post subject:  Re: ky cookie cutter build
it was a used frame and it already had every thing in it, i dont need to do any welding on, it took me a day to get it ready to paint it i took it down to bare metal before i painted it ill have it done by sunday evening :mrgreen:
Author:  bmoore [ Fri Dec 31, 2010 9:52 pm ]
Post subject:  Re: ky cookie cutter build
jessielee wrote:
it was a used frame and it already had every thing in it, i dont need to do any welding on, it took me a day to get it ready to paint it i took it down to bare metal before i painted it ill have it done by sunday evening :mrgreen:


who's frame was it :?: if you dont mind me asking :wink:
Author:  jessielee [ Fri Dec 31, 2010 9:54 pm ]
Post subject:  Re: ky cookie cutter build
its the one darrel had at the thanks giving ride, the on with deer horns on the front of it, cant wait to get er done
Author:  bmoore [ Fri Dec 31, 2010 9:56 pm ]
Post subject:  Re: ky cookie cutter build
jessielee wrote:
its the one darrel had at the thanks giving ride, the on with deer horns on the front of it, cant wait to get er done



congrats! thats a great start! look forward to seeing your progress
Author:  jessielee [ Fri Dec 31, 2010 9:59 pm ]
Post subject:  Re: ky cookie cutter build
thanks hopefully to be riding it sunday night :mrgreen:
Author:  davehix [ Sun Jan 02, 2011 4:39 pm ]
Post subject:  Re: ky cookie cutter build
Wheres the pics? :mrgreen:
Author:  jessielee [ Thu Jan 06, 2011 9:27 pm ]
Post subject:  Re: ky cookie cutter build
ive got the pics on the camra but i just havent had time to download them to the computer yet, but ill get them put on as soon as i can :mrgreen:
Author:  RaceBugg1098 [ Fri Jan 07, 2011 9:02 am ]
Post subject:  Re: ky cookie cutter build
lets see 'em!
Author:  jessielee [ Fri Jan 14, 2011 3:13 am ]
Post subject:  Re: ky cookie cutter build
well im almost done with it :mrgreen: and ill post pics of it when i get done and i figure out how to do that :wink:
and i set my torsion for it to be soft but its not sittin on the stops and that is taking away from my ground clearance, how do i set the torsion to be soft and still have ground clearance, on my 2 seater i had 17 to 18 inches in the back and on my 1 seater i only have 13 or 14
how much ground clearence do most of the 1 seaters have??
Author:  pipedope [ Fri Jan 14, 2011 11:20 am ]
Post subject:  Re: ky cookie cutter build
I like mine yo be about 1/4 from setting on the stops if u want it on the stops than it going to be stiff.I also run adjustable shocks so i can build them to do what i need them to.
Author:  Terry fryer [ Fri Jan 14, 2011 3:01 pm ]
Post subject:  Re: ky cookie cutter build
Some people notch the spring plates to get a little or cut the stops off and run limit straps. And it depends on what cv's you are running on how much angle you can put on them.
Author:  jessielee [ Fri Jan 14, 2011 7:33 pm ]
Post subject:  Re: ky cookie cutter build
mine is about 1/4 off the stops and im running bus cv joints, i might hace all the ground clearence i can but it dont seem like much
Author:  davehix [ Fri Jan 14, 2011 9:05 pm ]
Post subject:  Re: ky cookie cutter build
How much farther can you go up before cvs bind?
Author:  pipedope [ Fri Jan 14, 2011 9:29 pm ]
Post subject:  Re: ky cookie cutter build
Your right Terry i for got i did notch my spring plates there chrome molly spring plates they came wider then factory but i still notch them a little more than stock plates.
Author:  jessielee [ Fri Jan 14, 2011 9:32 pm ]
Post subject:  Re: ky cookie cutter build
idk im 1/4 inch off the stopps right now
Author:  davehix [ Fri Jan 14, 2011 9:43 pm ]
Post subject:  Re: ky cookie cutter build
Probably gona have to notch like they said but watch for cv bind and you dont want it to stiff.
Author:  jessielee [ Fri Jan 14, 2011 10:08 pm ]
Post subject:  Re: ky cookie cutter build
how do u knotch it? i dont get what ur all sayin :oops:
Author:  davehix [ Sat Jan 15, 2011 1:38 pm ]
Post subject:  Re: ky cookie cutter build
hope this helps its all i could find my puter wont let me load pics.
http://www.chircoestore.com/catalog/smf ... pic=5434.0


[quote=jessielee"]how do u knotch it? i dont get what ur all sayin :oops:[/quote]
Author:  jessielee [ Sat Jan 15, 2011 2:08 pm ]
Post subject:  Re: ky cookie cutter build
ok thanks that helps alot
Author:  kybuggy1 [ Mon Jan 17, 2011 9:13 pm ]
Post subject:  Re: ky cookie cutter build
You aint gonna get anymore than 13" without breakin joints if you run bus joints on that buggy.
Remember when I told you that you'd HAVE to get 930's to run a frame with the torsion/tranny set in it like ours?? I wasn't bs'in you. :wink:
Author:  jessielee [ Mon Jan 17, 2011 9:20 pm ]
Post subject:  Re: ky cookie cutter build
oh yea i forgot about u tellin me that, ill just have to run what i got right now, after i get a frontend ill be out of money for a wile gotta get a job :mrgreen:
did u all have a good ride this weekend larry, hope u all got alot of vids, i cant wait to get to ride
Author:  bmoore [ Mon Jan 17, 2011 9:44 pm ]
Post subject:  Re: ky cookie cutter build
jessielee wrote:
oh yea i forgot about u tellin me that, ill just have to run what i got right now, after i get a frontend ill be out of money for a wile gotta get a job :mrgreen:
did u all have a good ride this weekend larry, hope u all got alot of vids, i cant wait to get to ride


ive been tryin to get u a front end but he dont know forsure if he wants to let go of it yet :roll:
Author:  jessielee [ Mon Jan 17, 2011 9:59 pm ]
Post subject:  Re: ky cookie cutter build
ok thanks bmoore ive been looking for some and found a few but they was asking out the ass for them
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/