| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 042 or 044 heads? Valve size? On a 1915 woodsbuggy http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=9976 |
Page 1 of 1 |
| Author: | Go Big Or Go Home [ Tue Jul 27, 2010 2:47 pm ] |
| Post subject: | 042 or 044 heads? Valve size? On a 1915 woodsbuggy |
Hey guys... I am putting together a 1915 and have a set of basically stock 042 heads that have been punched out already to 94 that I got with the motor. But I also have a set of after-market 044 heads that are still stock size off my old motor... any suggestions on which ones I should run? I will be running 90% of the time in Wellsville. Seems to me like I should go for the highest compression with the low end torque... I am not sure of the valve size on either set. Should I run with the 042 and have valve work done or would I be better off to have my after-market heads off my old motor punched out? I am new to these things and any input would be appreciated. |
|
| Author: | RaceBugg1098 [ Tue Jul 27, 2010 3:34 pm ] |
| Post subject: | Re: 042 or 044 heads? Valve size? On a 1915 woodsbuggy |
Its MUCH cheaper to buy new heads with bigger valves than to have them installed on old heads |
|
| Author: | jon williams [ Tue Jul 27, 2010 3:50 pm ] |
| Post subject: | Re: 042 or 044 heads? Valve size? On a 1915 woodsbuggy |
personaly, the 042 heads would be the best for the 1915 in my opinion. the valve sizes are 42intake and 35.5 exhaust. i run the same size heads on my 2275 and i love them. the engine has plenty of bottome end. but i think your cam selection will be the biggest factor. what size cam are you gonna run? |
|
| Author: | ironhorse [ Tue Jul 27, 2010 4:02 pm ] |
| Post subject: | Re: 042 or 044 heads? Valve size? On a 1915 woodsbuggy |
its simple really the bigger the heads the better it runs |
|
| Author: | jon williams [ Wed Jul 28, 2010 3:34 pm ] |
| Post subject: | Re: 042 or 044 heads? Valve size? On a 1915 woodsbuggy |
DEPENDS ON HOW U WANT TO RIDE YOUR BUGGY. |
|
| Author: | harleyhunter05 [ Fri Jul 30, 2010 4:35 am ] |
| Post subject: | Re: 042 or 044 heads? Valve size? On a 1915 woodsbuggy |
i run 042 heads and a engle 110 cam on my 1915 and it is an awesome setup |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|