Jay needs a few things to fix his buggy. Everything new will cost about $1000.00.
CHAR LYNN TORQUE GENERATOR/ or unit that goes on the steering shaft. Also the Block.
Lines
Wilwood/ or knock off breaks
Staging Break


If you have any of this stuff and want to sell it or donate it to Jay let me know. The speed shop is waiting on this stuff to fix Jays buggy!!!!

Thank you for any help you can give. Click this link to see what we are talking about.

http://www.woodsbuggy.com/index.php?opt ... f=2&t=8901


.

Does any-one have any of these parts they want to sell Jay? We are going to have to buy this stuff soon, and that is going to be tough with no money. We have already spent $800.00 on his buggy through the hill climbs.

We will be taking donations at all the hill climbs to help fund his buggy. Thank you for your support.


.

I might be getting my hands on the charlyn valve,i'll let you know tommarow.

If you can that would be great. Thanks Bucky!!!!!!!!!

Does Larry need a hand brake?
CNC402


Or a staging brake?
CNC412

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

I sent him a steering brake so i think he needs the staging brake,but you might want to call and make sure.

OK, I was just thinking if Larry does away with the foot brake, he would need a hand brake to run the brakes.
If the foot brake is left intact, a staging brake would work.

_________________
Gary

Turbo VW Sand Racer
Polaris Ranger



"If you don't run into the Devil every once in awhile, you must be going in the same direction!"

Davis Motorsports FaceBook Page

I will call today.

Hand Brake

Im waiting on a buddy to see if he can get me the charlyn valve a whole lot cheaper than what they cost.I didn't realize they were over $300,but hang in there and i should here something later today.

I bought this today,,,took a chance,,,not sure it is correct but the part number is right and the price is righter. We will see,,,,what do yall think?

http://cgi.ebay.com/ws/eBayISAPI.dll?Vi ... K:MEWNX:IT

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

THATS IT .....YOU STOLE IT FOR THAT PRICE

Hope so,,

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

We may need this if we use a separate power steering pump,,,
http://www.mooreparts.com/store/product/2688/AC411000P/

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

I do not know what we need please call Larry and ask!! He is a great guy.

hydsalvager from Ebay has donated a port block and is sending it to me. Check out his auctions for Char Lynn products.

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

The Char Lynn unit arrived today and it looks great and we "STOLE" it. It was paid for with money donated by competitors in the Woodsbuggy.com Hill Climb Series

_________________
If your clutch ain't slippin,, you probably got it adjusted right!!!!!

We still need a single handle brake, and some break calipers. And one have any?????

Didn't that brake i sent show up? or you talking about a staging brake?

Staging!!!! My Bad it was a long day.


THANK YOU BUCKY FOR SENDING THE TURNING BRAKE!!!



.

Not a problem,i thought that it didn't show up