| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| 1915 into a 2387 http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=9127 |
Page 1 of 1 |
| Author: | jessielee [ Wed Mar 24, 2010 10:42 pm ] |
| Post subject: | 1915 into a 2387 |
i have a 1915 and i'm thinking about building it up to a 2387, about how much will that cost |
|
| Author: | perrib [ Wed Mar 24, 2010 11:40 pm ] |
| Post subject: | Re: 1915 into a 2387 |
Last parts I bought for an 86x94 De Mello crank 600 De Mello H beam rods 300 Mahle P&Ls 180 DeMello lightened flywheel 140 Gaskets Bearings etc 200 Pushrods 80 Demello balanced all the parts as part of the price. You may also want/need better heads, larger carbs, different cam etc |
|
| Author: | jessielee [ Thu Mar 25, 2010 12:03 am ] |
| Post subject: | Re: 1915 into a 2387 |
so basically i need to save 2000 or 2500 to build it |
|
| Author: | kybuggy1 [ Thu Mar 25, 2010 8:17 am ] |
| Post subject: | Re: 1915 into a 2387 |
No. You should be able to do it for much less than $2000. Call Tim 1 606 864 2217 |
|
| Author: | jessielee [ Sun Mar 28, 2010 9:43 pm ] |
| Post subject: | Re: 1915 into a 2387 |
i'll probally just ride my 1915 this year and build it this winter, i'll have the money to do it then |
|
| Author: | MickeyMouse [ Sun Mar 28, 2010 11:13 pm ] |
| Post subject: | Re: 1915 into a 2387 |
That sounds like the best plan... Run the 1915 until it dies... I ran my 1835 for years without any problems.. Ever since I built my 2300, I have had some type of trouble on every ride. Most of the issues have just been working out the bugs but it was nice to just turn the key and go with my 1835. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|