| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Using a dry sump pump for power steering http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=9043 |
Page 1 of 1 |
| Author: | Eric DeBord [ Sat Mar 13, 2010 3:29 pm ] |
| Post subject: | Using a dry sump pump for power steering |
Anyone ever use a dry sump or 2-stage pump's 2nd stage for power steering? results? I have also heard of connecting the power steering lines together and install an air valve then pressurize the system (using no pump). Anyone try this? Eric |
|
| Author: | Baddvw [ Sat Mar 13, 2010 5:09 pm ] |
| Post subject: | Re: Using a dry sump pump for power steering |
Where did you hear that from? I do know that if you buy a stage 2 pump, oil will come out from the pickup tube to both outfeeds on the pump and it has only 1 infeed (scavenger line) I dunno, it may work if its got its OWN stage like in and out only, nothing from the engine at all. |
|
| Author: | Odyknuck [ Sun Mar 14, 2010 7:23 am ] |
| Post subject: | Re: Using a dry sump pump for power steering |
You need at least 1000 PSI for power steering. A dry Sump pump will not produce no were near that pressure. Its designed to handle a few hundred PSI max. You can however buy a dry sump pump with the ability to attach a power sterring pump to the other end for direct drive. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|