| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| deal came through on buggy http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=7718 |
Page 1 of 1 |
| Author: | superkingd [ Mon Sep 28, 2009 11:53 am ] |
| Post subject: | deal came through on buggy |
I got a buggy sunday on a trade here is the specs single dellorto 3 rib with problems and an extra 3 rib 1915 goodyear terre tires 31's tractor 3 rib fronts 96 inch wheel base ext oil cooler with a adapter for a spin on filter oil pres and temp gauges single cutter handle bent ball joint front reinforced rear arms car irs rear torsion several welds that might be bubble gum painted over. engine came from strictly vw in cali build sheet says 8 dowel crank balanced rods 110 engle cam w bolt on gear cima pistons new solid shaft rockers with swivals 12 lb light flywheel that what the sheet says. I'm really leaning towards using all the parts on it to build my other frame. It's a 120 inch wheelbase midengine. I want to make it a rear engine with a small back seat. Just gonna use the little 2 kid bench. What is a good wheel base for this. Any ideas? Also anything in engine specs throwing up a red flag that it has a weak point or something that just sucks |
|
| Author: | DVS1 [ Mon Sep 28, 2009 12:22 pm ] |
| Post subject: | Re: deal came through on buggy |
Sounds good to me. How bout some pics? |
|
| Author: | superkingd [ Fri Oct 02, 2009 10:49 am ] |
| Post subject: | Re: deal came through on buggy |
I'm workin on the pics. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|