WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

new torision
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=5836		 Page 1 of 1
Author:  windrock child [ Thu Feb 19, 2009 8:46 pm ]
Post subject:  new torision
I just bought a new rear torision irs whole thing to switch mine from swingaxle and go to 3rib trans. On my old torsion the swingaxle one it has frame horns i guess there called that hold the tranny up but my new irs torsion does not. do i just need to cut the ones off my old one and weld them on? Or is there some other way to do this I dont think the torsion i just bought ever had the frame horns on it thanks for the help
Author:  D. Marks [ Thu Feb 19, 2009 10:01 pm ]
Post subject:  Re: new torision
My frame has 1.5" tubing instead of the stock horns. Do you have the tranny mount on the irs torsion?
Author:  windrock child [ Thu Feb 19, 2009 10:06 pm ]
Post subject:  Re: new torision
yeah it has the tranny mount on it
Author:  instigator [ Thu Feb 19, 2009 10:13 pm ]
Post subject:  Re: new torision
under $100 Image
Author:  windrock child [ Thu Feb 19, 2009 10:21 pm ]
Post subject:  Re: new torision
were can i get this at thanks
Author:  instigator [ Thu Feb 19, 2009 10:37 pm ]
Post subject:  Re: new torision
berrien buggy i think it was like $88
Author:  windrock child [ Thu Feb 19, 2009 10:39 pm ]
Post subject:  Re: new torision
thanks a bunch
Author:  instigator [ Thu Feb 19, 2009 10:42 pm ]
Post subject:  Re: new torision
thats why where here! helping family. some we dont claim
Author:  rockrockets1 [ Thu Feb 19, 2009 10:44 pm ]
Post subject:  Re: new torision
:shock: --------------- :lol:
Author:  D. Marks [ Thu Feb 19, 2009 11:34 pm ]
Post subject:  Re: new torision
A buddy of mine bought a frame with that mount on it. It is VERY nice. I would not have guessed it would be that cheap.
Author:  m.ralston [ Fri Feb 20, 2009 9:53 am ]
Post subject:  Re: new torision
windrock child wrote:
I just bought a new rear torision irs whole thing to switch mine from swingaxle and go to 3rib trans. On my old torsion the swingaxle one it has frame horns i guess there called that hold the tranny up but my new irs torsion does not. do i just need to cut the ones off my old one and weld them on? Or is there some other way to do this I dont think the torsion i just bought ever had the frame horns on it thanks for the help

Are you sure it is irs or is it a bus torsion?
Author:  windrock child [ Fri Feb 20, 2009 10:38 pm ]
Post subject:  Re: new torision
it might be a bus torison i really dnt no the difference
Author:  J.DiNapoli [ Sat Feb 21, 2009 12:23 am ]
Post subject:  Re: new torision
Bus torsion is larger in diameter than car torsion
Author:  windrock child [ Sat Feb 21, 2009 10:05 am ]
Post subject:  Re: new torision
would the bus torsion not have the frame horns because it really doesnt look like there has ever been any on it
Author:  odee [ Sun Feb 22, 2009 9:36 am ]
Post subject:  Re: new torision
guys thanks for such a helpful site. most arn't this way. Is there any way to tell the difference between the differnt types of torsions? thanks again.
Author:  gasman [ Sun Feb 22, 2009 6:53 pm ]
Post subject:  Re: new torision
Tubular Frame Horns


shown with optional rear trans mount

Attachment:
33590c30.jpg

Stronger than the single tubes other manufactures offer as replacements for damaged stock frame horns or as an accessory to their custom torsion, our tubular frame horns attach to the torsion more than half way around. This ensures a stronger joint, better able to handle the abuse of off-road terrain or really deep potholes.


Available as an option for custom torsions ordered for customer installation, our tubular frame horns are required when a custom torsion is factory installed in a chassis.


$88.28 a pair
Installation, sales tax & shipping not included. http://www.berrienbuggy.com I hope this will help you, I learnt a whole lot just trying to post it lol. :mrgreen:
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/