| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| Wellsville. http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=3876 |
Page 1 of 1 |
| Author: | D. Marks [ Sun May 18, 2008 2:40 pm ] |
| Post subject: | Wellsville. |
I just finshed adding up the money raised from the raffle tickets. There will be $300 going towards the party. If you did not buy a ticket but plan to attend the party please find the guys who are putting the party on and give them a few bucks. I know they gave alot out of pocket for the party we had last fall. Hillaholic should win the arms. He gave $100 alone! Thanks Brad. Dean |
|
| Author: | DVS1 [ Sun May 18, 2008 10:38 pm ] |
| Post subject: | Re: Wellsville. |
Damn Brad, You really want those arms. |
|
| Author: | purplerail [ Sun May 18, 2008 10:57 pm ] |
| Post subject: | Re: Wellsville. |
cant wait just a few more days |
|
| Author: | Kyle [ Mon May 19, 2008 12:49 am ] |
| Post subject: | Re: Wellsville. |
We will for sure be donating when we get there. |
|
| Author: | hillaholic [ Tue May 20, 2008 9:07 am ] |
| Post subject: | Re: Wellsville. |
DVS1 wrote: Damn Brad, You really want those arms. The arms would be nice but the real reason was to help out with the party. Didn’t the last party cost you over a grand? Brad |
|
| Author: | wildwillie [ Tue May 20, 2008 5:35 pm ] |
| Post subject: | Re: Wellsville. |
ha guys me and tim talked today i told him about the party and how yall are tryin to raise money so he would like to donate some front 3x3 arms and some adapter plates for the wide 5 race car rims to raffel off so could some one let me.. know how yall would like to do it we will get in thu.night we hope this helps yall out 
|
|
| Author: | Kyle [ Tue May 20, 2008 5:51 pm ] |
| Post subject: | Re: Wellsville. |
wildwillie wrote: ha guys me and tim talked today i told him about the party and how yall are tryin to raise money so he would like to donate some front 3x3 arms and some adapter plates for the wide 5 race car rims to raffel off so could some one let me.. know how yall would like to do it we will get in thu.night we hope this helps yall out What a guy he is. I would just sell tickets there for that but I am no one important so 
|
|
| Author: | frankenbuggy06 [ Tue May 20, 2008 9:38 pm ] |
| Post subject: | Re: Wellsville. |
well guys i am borrowing my buddies old motor and i tightened the fitting on the full flow cover a lil too tight. So this may mean that i am not going cuz it isn't just a regualr cover. It has machined holes for the rods from the gears of the oil pump, and online i cant tell what the back looks like. So i may be screwed |
|
| Author: | hillaholic [ Wed May 21, 2008 9:05 am ] |
| Post subject: | Re: Wellsville. |
frankenbuggy06 wrote: well guys i am borrowing my buddies old motor and i tightened the fitting on the full flow cover a lil too tight. So this may mean that i am not going cuz it isn't just a regualr cover. It has machined holes for the rods from the gears of the oil pump, and online i cant tell what the back looks like. So i may be screwed Get a new pump and cover from LAproducts for $50-$60. Or just run a stock pump with a $12 full flow cover for just the weekend. I have one of the pumps with the filter built in for a flat cam you can use to get by for the weekend. Just let me know and I will bring it or you can pick it up today I'm in Elyria and I will be up around noon. Brad |
|
| Author: | plumberbill [ Wed May 21, 2008 11:09 am ] |
| Post subject: | Re: Wellsville. |
tuesday is the last day that la products is open so if you need it better do it now. there all headed to michigan |
|
| Author: | Odyknuck [ Wed May 21, 2008 11:55 am ] |
| Post subject: | Re: Wellsville. |
Take the fitting out and grind a "V" slot down the crack and fill with JB weld. Then after that sets apply JB weld to the fitting and screw in to the cover. Do not over tighten. Let it sit and come and ride. |
|
| Author: | frankenbuggy06 [ Wed May 21, 2008 3:50 pm ] |
| Post subject: | Re: Wellsville. |
Well i have 2 being brung down by the guys i ride with. ill bring my grinder and jb weld just incase. ill be down either way. Be ready to take some video, i dont have a passenger and i finally have some power behind me for a bit, i have a feeling imma gonna get a bit crazy |
|
| Author: | MadMike [ Wed May 21, 2008 6:53 pm ] |
| Post subject: | Re: Wellsville. |
That's what we want to hear. I have some J-B Weld if ya need it!! |
|
| Author: | hillaholic [ Thu May 22, 2008 10:44 am ] |
| Post subject: | Re: Wellsville. |
Do you have a flat cam? Do you want me to bring the pump and filter I have? |
|
| Author: | hillaholic [ Thu May 22, 2008 10:55 am ] |
| Post subject: | Re: Wellsville. |
Can someone bring there pressure bleeder with them so I can borrow it? I can’t seem to get my brakes to feel right. I’ll bring the fluid just let me know how much to bring. Oh yeah I have the cnc round reservoir. Brad |
|
| Author: | plumberbill [ Fri May 23, 2008 8:20 am ] |
| Post subject: | Re: Wellsville. |
hillaholic wrote: Can someone bring there pressure bleeder with them so I can borrow it? I can’t seem to get my brakes to feel right. I’ll bring the fluid just let me know how much to bring. Oh yeah I have the cnc round reservoir. Brad i will bring mine its set up for cnc, dot 3-4 fluid one large bottle ill be there friday 6-7pm |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|