On my rack i noticed if i mount it on the upper part of the front beam it looks like my tie rods will bottom out on my frame. My question is is there some kind of spacer to mount between the hiem and the spindle or maybe a slight bend in the tie rod tube itself. Also what really is optimum placement for the rack. Does anyone have a setup like mine that could share some insight. I have 4inch longer by 1.75 inch wider front trailing arms. I have the saco magnum rack. And woods or fodrill spindles cant remember. I have all my hiem and hi-mis alignment spacers. 6 inch wider than stock front beam. Also what amount of spacers are you guys running on your spindles between the link-pins mines all out of wack was gonna fix that after teardown and paint. Heres a pic of my front end let me know what you guys think or suggest..
