WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

clutch ??????
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=3202		 Page 1 of 1
Author:  purplerail [ Sun Mar 02, 2008 11:48 pm ]
Post subject:  clutch ??????
has anyone osed this stuff?
http://www.cbperformance.com/catalog.asp?ProductID=1002
Author:  dunebuggy79 [ Mon Mar 03, 2008 12:09 am ]
Post subject: 
I haven`t osed it for a clutch but My buddy has USED it on his for a few years and never had a problem.We tried the ones for brakes DONT DO THAT a thorn bush will tear them right out :eek: Those are for the guys that only play in the sand :lol:

aaron
Author:  fortydegnorth [ Mon Mar 03, 2008 9:48 am ]
Post subject: 
I would just run a hard line like the brakes, with a hose to the slave cylinder. I don't trust nylon, it seems to crush, pinch and break!
Author:  The Wild Kids [ Mon Mar 03, 2008 2:05 pm ]
Post subject: 
Hard line is the only way to go with a woods buggy. I have seen one incident of a line breaking and causing a crash. Not worth it to me IMO.

The Wild Kids
Author:  turboblue [ Mon Mar 03, 2008 6:17 pm ]
Post subject: 
Was trouble shooting a hydraulic clutch problem one time.
It had plastic line on it.
Clutch arm would not come back far enough to disengage.
Even tried a new slave cylinder.
No joy........ :evil:

Turned out the plastic was swelling ever so slightly and not enough volume of fluid was transferring to the slave cylinder.

Installed a metal line and it worked fine.
Author:  Roy [ Mon Mar 03, 2008 6:24 pm ]
Post subject: 
I used it to hook up my ice maker on my new fridge. :lol:
Author:  bamafan [ Mon Mar 03, 2008 7:12 pm ]
Post subject:  i use it
I use it on my front brakes. Dirt track racers use it all the way around on thier brakes. Its not the same thing as ice maker line. takes special fittings just for that line. If routed properly it is great.
Author:  turboblue [ Mon Mar 03, 2008 7:23 pm ]
Post subject:  Re: i use it
[quote='bamafan']I use it on my front brakes. Dirt track racers use it all the way around on thier brakes. Its not the same thing as ice maker line. takes special fittings just for that line. If routed properly it is great.[/quote]

I think Roy was joking........... 8)
Author:  dunebuggy79 [ Mon Mar 03, 2008 7:32 pm ]
Post subject:  Re: i use it
[quote='bamafan']I use it on my front brakes. Dirt track racers use it all the way around on thier brakes. Its not the same thing as ice maker line. takes special fittings just for that line. If routed properly it is great.[/quote]
Thing is dirt track racers dont have tree limbs laying in the racetrack for them to rip the lines out :eek:
aaron
Author:  Aaron Creech [ Mon Mar 03, 2008 7:40 pm ]
Post subject: 
Hey Gary what about the time you blew one of those plastic lines at Bug-In on the uphill drags?
Author:  turboblue [ Tue Mar 04, 2008 11:35 am ]
Post subject: 
[quote='Aaron Creech']Hey Gary what about the time you blew one of those plastic lines at Bug-In on the uphill drags?[/quote]

Yeah my butt still puckers over that one Aaron.
Thought I was gonna go in the graveyard that night.

My drag buggy had metal lines on it before the next weekend........ 8)
Author:  fortydegnorth [ Tue Mar 04, 2008 1:46 pm ]
Post subject: 
Dirt track racers use brakes?!!!!!!!! :eek:
Author:  turboblue [ Tue Mar 04, 2008 4:30 pm ]
Post subject: 
[quote='fortydegnorth']Dirt track racers use brakes?!!!!!!!! :eek:[/quote]

Sand draggers do......... 8)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/