Can I use a powerglide shifter on my automatic? Is 1st gear and 2 nd gear necessary? can I put a shifter in and adjust it to go- D -N -R -P with a lockout on park
ALSO I CHECKED SEVERAL THREADS AND DID NOT FIND THIS QUESTION 
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| CD QUESTIONS PEOPLE WITH EXPERIENCE PLEASE NO B/S http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=3064 |
Page 1 of 1 |
| Author: | wildpinto [ Fri Feb 15, 2008 11:56 pm ] |
| Post subject: | CD QUESTIONS PEOPLE WITH EXPERIENCE PLEASE NO B/S |
Can I use a powerglide shifter on my automatic? Is 1st gear and 2 nd gear necessary? can I put a shifter in and adjust it to go- D -N -R -P with a lockout on park ALSO I CHECKED SEVERAL THREADS AND DID NOT FIND THIS QUESTION
|
|
| Author: | BRAD B [ Sat Feb 16, 2008 12:12 am ] |
| Post subject: | |
WELL, i was going to give a response but, you know what they say about TRUCK DRIVERS AND B/S 
|
|
| Author: | MadMike [ Sat Feb 16, 2008 12:58 am ] |
| Post subject: | |
I thought it was one A-hole following another? You know, one that knows the way there and other knows the way back. 
|
|
| Author: | BRAD B [ Sat Feb 16, 2008 1:36 am ] |
| Post subject: | |
I'm not a A-HOLE , Get it right, i,m a HOLE-A
|
|
| Author: | kbaby [ Sat Feb 16, 2008 1:54 am ] |
| Post subject: | |
wildpinto, you need a shifter out of a vanagan bus or audi 4000 or 5000 car the detint is the same on these shifters , also you don't need first , you need to be able to start off in second, never drive. If you start out in drive under power it will smoke the forward clutch pack. shifter should go from 2nd straight to reverse , no lock out. Hope this helps. 
|
|
| Author: | kbaby [ Sat Feb 16, 2008 10:05 am ] |
| Post subject: | |
curt when do you use first? you can drive Rocks and his changes to second within 3 ft. His goes from second position straight to reverse with no lock accept park. |
|
| Author: | kbaby [ Mon Feb 18, 2008 2:14 pm ] |
| Post subject: | |
| o.k.
|
|
| Author: | wildpinto [ Mon Feb 18, 2008 8:34 pm ] |
| Post subject: | |
So I need to make my shifter execpt all gears. Rachet shifter or Dtent I have several of both or is it beter to build a straight rod to a custom shifter on himes? THANKS TONY |
|
| Author: | rockrockets1 [ Mon Feb 18, 2008 10:39 pm ] |
| Post subject: | |
I use a ratchet I don't like it a shifter from a audi 4 or 5000 has the same Dtent a match but like i said it needs to go from 2nd strait to reverse |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|