| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| UPDATE oil cooler explosion http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=3000 |
Page 1 of 1 |
| Author: | nickschlemer [ Sun Feb 10, 2008 4:41 am ] |
| Post subject: | UPDATE oil cooler explosion |
Well i replaced my oil relief pistons one was stuck talk about a bitch trying to get those screws things out definately will replace those with hex. Also i bought a new oil cooler but its bigger than the other so i had to modify my doghouse so it would fit not a big deal just the studs from my other are not long enough now. I was wondering if anyone had a spare set laying around they would wanna come off of or please tell me where i can get them i cant seem to find them anywhere? Thanks in advance Nick |
|
| Author: | nickschlemer [ Sun Feb 10, 2008 6:47 pm ] |
| Post subject: | |
I could really use some help here? On where to get some of these studs.. |
|
| Author: | Eric DeBord [ Sun Feb 10, 2008 7:08 pm ] |
| Post subject: | |
You need some from a bus oil cooler adaptor. Probably going to be tough to find. You might find some 6mm all thread and make some, or drill and tap to 1/4 ? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|