WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

My Tranny setup
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=2865		 Page 1 of 1
Author:  nickschlemer [ Wed Jan 30, 2008 3:23 pm ]
Post subject:  My Tranny setup
Hey everyone,
Im getting ready to order all my stuff for my tranny. I have a 6rib now i need to order the clutch and all that good stuff. I thought i posted this already but couldnt find it. I was wondering what is the best setup to go with. Im gonna be running a 2276cc. I will be doing lots of hillclimbing mudding trail riding and some on road use (not legally lol). Whats you guys suggestion on clutch, pressure plate and anything im not mentioning..
Thanks always.
Author:  Firebug [ Wed Jan 30, 2008 3:33 pm ]
Post subject: 
Get ready for lots of different answers. I kept burning stock bug clutch disc with a subaru 2200 . So after going to a Kennedy stage 2 pressure plate and a Kushloc disc, I haven't had any problems. My buddy broke a 6 rib with a 6 puck. Another buddy loves his 6 puck but his tranny is beefed up some. This was covered earlier. Maybe someone can find it. 8)
Author:  Kyle [ Wed Jan 30, 2008 3:44 pm ]
Post subject: 
2332cc and i run kennedy stage 1 never had it slip yet
Author:  dunebuggy79 [ Wed Jan 30, 2008 4:05 pm ]
Post subject: 
I wouldn`t use a 4 or 6 puck they grab way to hard and will tear everything up a good pressure plate and kush loc is perfect.

aaron
Author:  rockrockets1 [ Wed Jan 30, 2008 4:38 pm ]
Post subject: 
ya'll don't know what the puck ya'll talking about


I just had to say that ha ha :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol:
Author:  rockrockets1 [ Wed Jan 30, 2008 4:41 pm ]
Post subject: 
K.E.P. talk to JODIE # is 661-272-1147

I would think a 1700 PP
kush lock or dakin disk
Author:  Roy [ Wed Jan 30, 2008 5:47 pm ]
Post subject: 
I run a Stage 1 with a cushlock disc. Works great for me.
Author:  D. Marks [ Wed Jan 30, 2008 6:29 pm ]
Post subject: 
Kennedy stage 1 and a 4 puck works for me.
Author:  DVS1 [ Wed Jan 30, 2008 6:34 pm ]
Post subject: 
Kennedy stage 2 with stock disc. I wanted the disc to be my weakest link. It's easier to change a clutch than rebuild a tranny.
Author:  dunebuggy79 [ Wed Jan 30, 2008 6:49 pm ]
Post subject: 
[quote='DVS1']Kennedy stage 2 with stock disc. I wanted the disc to be my weakest link. It's easier to change a clutch than rebuild a tranny.[/quote]

Thats what I was getting at!!
Author:  harleyhunter05 [ Wed Jan 30, 2008 6:50 pm ]
Post subject: 
i run a kennedy stage 2 pressure plate with a stock disk too
Author:  wildpinto [ Wed Jan 30, 2008 6:58 pm ]
Post subject: 
we run Kennedy stage 1 with 3 puck on our 2276 on our 1835 we run stage 1 with 4 puck in the pinto buggy we run a volvo pressure plate with dual springs and a 3 puck but we do not ride the clutch theay are in or out
Author:  DVS1 [ Wed Jan 30, 2008 6:58 pm ]
Post subject: 
You see!!! Great minds think alike :mrgreen: :mrgreen: :mrgreen:
Author:  sharpshooter [ Wed Jan 30, 2008 7:05 pm ]
Post subject: 
I run a ken. stage 4 with a daiken super disc,works great
Author:  wildpinto [ Wed Jan 30, 2008 7:16 pm ]
Post subject: 
sharpscooters set up works really well and is a whole lot smoother on a hill side than a puck he can slip his clutch and wen it locks it is as solid as a puck
Author:  FLIPIT [ Thu Jan 31, 2008 1:43 am ]
Post subject: 
2276 6 RIB 5.42 R/P 091 BILLET SUPER DIFF RUN KENNEDY STAGE 2 STOCK DICS NEVER HAD A PROMBLEM--I AGREE WITH DUNNEBUGGY79
Author:  nickschlemer [ Thu Jan 31, 2008 4:06 am ]
Post subject: 
How do i tell what flywheel i have i know it has 130 teeth for a 12 volt. But ive been told to measure the indention on the inside of the flywheel. Thing is theres two indentions one is 8" and the other is 9". Im confused when it comes to trannies flywheels and that whole mess.. Can someone explain this to me better or show me a pic of what the hell to measure i would greatly appreciate it..
Thanks
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/