I ran my ej22 on a 3 rib and swithced to 6rib with no problem. I did keep the 3 rib bell housing. I think the adapter plate takes out the concern of the mainshaft being long. I think the ej22 plate will work on ej33 and ej25 also. Good luck.
| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| a question on an adapterplate http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=2454 |
Page 1 of 1 |
| Author: | tanner2803 [ Wed Dec 26, 2007 12:10 pm ] |
| Post subject: | a question on an adapterplate |
my question is will an adapter plate is for a 2.2 subie will it fit any vw trany as in a 6,5,and a 3 rib or is there a separate adapter for each thanxs for the help |
|
| Author: | harleyhunter05 [ Wed Dec 26, 2007 12:19 pm ] |
| Post subject: | |
i dont know much about subie---but the bolt pattern on any vw tranny is the same---3rib,5,6, or car they all bolt to any VW motor |
|
| Author: | Firebug [ Wed Dec 26, 2007 12:31 pm ] |
| Post subject: | |
I ran my ej22 on a 3 rib and swithced to 6rib with no problem. I did keep the 3 rib bell housing. I think the adapter plate takes out the concern of the mainshaft being long. I think the ej22 plate will work on ej33 and ej25 also. Good luck.
|
|
| Author: | Stevo [ Wed Dec 26, 2007 3:14 pm ] |
| Post subject: | |
just got my suby kit monday. they said the only difference is the lenth of the bolts for the bell housing. other than that they are the same plate. The six-rib bolts are 1/4 inch longer |
|
| Author: | tanner2803 [ Wed Dec 26, 2007 3:23 pm ] |
| Post subject: | |
ok thanxs for all the help i got an adapter and clutch on the way 
|
|
| Author: | rockrockets1 [ Wed Dec 26, 2007 5:38 pm ] |
| Post subject: | |
all those new subie's firebug you must be proud |
|
| Author: | Firebug [ Wed Dec 26, 2007 5:50 pm ] |
| Post subject: | |
Good secrets are hard to keep. Maybe chaindrive will catch on as well pocketrocket , and Tanner if you need any help with the modifications just let us know.
|
|
| Author: | rockrockets1 [ Wed Dec 26, 2007 5:51 pm ] |
| Post subject: | |
|
|
|
| Author: | tanner2803 [ Wed Dec 26, 2007 7:16 pm ] |
| Post subject: | |
ok firebug i will and thanxs for all the help |
|
| Author: | MadMike [ Wed Dec 26, 2007 8:36 pm ] |
| Post subject: | |
[quote='Firebug'] I think the ej22 plate will work on ej33 and ej25 also. Good luck. [/quote]
2.0, 2.2, 2.5 all fit the same plate. The 6 cylinders take a different adaptor. |
|
| Author: | Firebug [ Wed Dec 26, 2007 8:55 pm ] |
| Post subject: | |
I stand corrected. thanks MadMike,, c u at wellsville
|
|
| Author: | MadMike [ Wed Dec 26, 2007 9:30 pm ] |
| Post subject: | |
I can't wait |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|