| WoodsBuggy.com http://www.woodsbuggy.com/phpBB3/ |
|
| damn motor http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=2421 |
Page 1 of 1 |
| Author: | Kyle [ Mon Dec 24, 2007 2:21 am ] |
| Post subject: | damn motor |
heres the results of 10 minutes of running. and not ran hard on. i just got in the damn thing first trail. will know more tomorrow on what more damage there is other than bearings rod crank and case. the oil screen one i am holding a piece of bearing that came off the screen. thanks brian and greg for helping me 
|
|
| Author: | DVS1 [ Mon Dec 24, 2007 2:54 am ] |
| Post subject: | |
NOT cool! |
|
| Author: | Roy [ Mon Dec 24, 2007 7:15 am ] |
| Post subject: | |
Let me know if you need anything Kyle. I will help you out anyway I can. R |
|
| Author: | Stevo [ Mon Dec 24, 2007 11:45 am ] |
| Post subject: | |
Sounds like a sock party canadate!! Beat down time! |
|
| Author: | KFondren [ Mon Dec 24, 2007 12:51 pm ] |
| Post subject: | feel ya |
I just got through with a motor that looked just like that. Makes you want to puke. |
|
| Author: | Firebug [ Mon Dec 24, 2007 1:44 pm ] |
| Post subject: | |
Chalk it up to lessons learned. You will be happier and prouder when you know what's in your new engine. We all take chances on used stuff and in the long run it should work out if you don't give up. Good luck on your project. 
|
|
| Author: | A. Cole [ Mon Dec 24, 2007 2:22 pm ] |
| Post subject: | |
Did you ever hear anything from the seller? |
|
| Author: | Odyknuck [ Mon Dec 24, 2007 2:23 pm ] |
| Post subject: | |
Kyle, Dont get discourged, I have never bought a used engine yet that I did not have to rebuild in a short time after I owned it. If you need a crank and rods I have one. |
|
| Author: | Kyle [ Mon Dec 24, 2007 6:38 pm ] |
| Post subject: | |
thanks guys....i took it up to greg today heres a list of what i need 78mm crank or bigger (prefer bigger heh) new case rods bearings and a cam oky greg called and left ya a message call me back when ya see this. anybody that has some of this call me 740-819-9173 o and i got the seller to answer the phone one time. now i just get ignored. kyle |
|
| Author: | sharpshooter [ Mon Dec 24, 2007 7:47 pm ] |
| Post subject: | |
Please post sellers info so no one else gets took 
|
|
| Author: | Kyle [ Mon Dec 24, 2007 10:04 pm ] |
| Post subject: | |
Seller: vdub194 |
|
| Author: | Baddvw [ Mon Dec 24, 2007 10:18 pm ] |
| Post subject: | |
Give him a negative feedback, this will teach him. |
|
| Author: | mudd mutt [ Tue Dec 25, 2007 3:18 am ] |
| Post subject: | |
I talked to this guy before Kyle bid on it and he swore it was well taken care of 2-3yr old and didnt need anything other than some jetting on carb! WELL the friggin case is ROTTED out around the oil sump so bad he used at least a tube of silcone glue on it!!!!! What a JackA##!!! Oh yea I forgot the spun rod brg,HAMERED out thrust brg in case,cam with big nicks in lobes! What a POS lyin scum bag
OK I feel a little better now,,,,On to a better note MERRY CHRISTMAS everyone! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|