WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Roller rockers
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=16840		 Page 1 of 2
Author:  NRIbuggys [ Fri Apr 11, 2014 7:56 am ]
Post subject:  Roller rockers
Lookin to buy a set. Anyone know the best place to get them? 1.4 or 1.3


Sent from my iPhone using Tapatalk
Author:  helmetguy [ Fri Apr 11, 2014 9:07 am ]
Post subject:  Re: Roller rockers
Nasty habits ( cory) just bought a set but I dont know where from.you might pm him

Sent from my SCH-I545L using Tapatalk
Author:  Aaron Creech [ Mon Apr 14, 2014 7:48 pm ]
Post subject:  Re: Roller rockers
Just get them directly from pauter machine
Author:  NRIbuggys [ Mon Apr 14, 2014 8:05 pm ]
Post subject:  Re: Roller rockers
Yea ab 450 a set. I heard the new style was junk w/o the needle bearings. Anybody?????


Sent from my iPhone using Tapatalk
Author:  Drews Off Road [ Tue Apr 15, 2014 11:39 am ]
Post subject:  Re: Roller rockers
In all the years we ran these rockers, weather on our 9400rpm pro stock 2525cc vw or 6500 rpm buggy engines, the only problem I had was faulty needle bearings......so the way they are now with no bearing is much better and will distribute the load much better and take the valve float, heat, heavy valve spring pressures and general beating better than ever. I have seen a lot of rockers and have always said you may cry once while paying for these but they will be there year after year! BTW they are $440.00 with free shipping from the shop :o
Author:  ron [ Wed Apr 16, 2014 7:04 am ]
Post subject:  Re: Roller rockers
Drews Off Road wrote:
In all the years we ran these rockers, weather on our 9400rpm pro stock 2525cc vw or 6500 rpm buggy engines, the only problem I had was faulty needle bearings......so the way they are now with no bearing is much better and will distribute the load much better and take the valve float, heat, heavy valve spring pressures and general beating better than ever. I have seen a lot of rockers and have always said you may cry once while paying for these but they will be there year after year! BTW they are $440.00 with free shipping from the shop :o

I agree , I have 2 sets of the old style blue ones with the needle bearing mashed flat in one of the rockers on each side , the new style is the same style used in wrist pin to piston rod technology that has held up in chevy engines for several hundred thousand miles !
They also have more clearance than the old style , I had to take a dremmel to them in several places !
Image

Sent from my SM-N900V using Tapatalk
Author:  jesse [ Wed Apr 16, 2014 8:15 pm ]
Post subject:  Re: Roller rockers
hurry and buy the damn things i got a drag motor waiting on your candy ass :twisted:
Author:  NRIbuggys [ Thu Apr 17, 2014 6:21 am ]
Post subject:  Re: Roller rockers
Jesse.. The only way you gonna be able to see me is with a telescope FACT!!


Sent from my iPhone using Tapatalk
Author:  ron [ Thu Apr 17, 2014 8:57 am ]
Post subject:  Re: Roller rockers
DAMN !!

Sent from my SM-N900V using Tapatalk
Author:  jesse [ Thu Apr 17, 2014 9:01 am ]
Post subject:  Re: Roller rockers
That is a FACTcause your gonna look real small at the bottom
Author:  kevin f [ Sat Apr 26, 2014 8:29 am ]
Post subject:  Re: Roller rockers
:shock::shock::shock::shock::shock:

Sent from my DROID RAZR using Tapatalk
Author:  NRIbuggys [ Sat Apr 26, 2014 12:19 pm ]
Post subject:  Re: Roller rockers
Jesse... If we went hill for hill, dollar for dollar. You wouldn't have no lunch money for month


Sent from my iPhone using Tapatalk
Author:  Wanted_Fugitive [ Sat Apr 26, 2014 6:35 pm ]
Post subject:  Re: Roller rockers
Sounds like a grudge match to me!!!!!!!
Author:  jesse [ Sat Apr 26, 2014 8:45 pm ]
Post subject:  Re: Roller rockers
Hey when he is rdy we will take it to middle of bombdrop
Author:  ron [ Sat Apr 26, 2014 8:52 pm ]
Post subject:  Re: Roller rockers
Take it to Kentucky & see who's the man & be done with the girl talk ! :mrgreen:

Sent from my SM-N900V using Tapatalk
Author:  ron [ Sat Apr 26, 2014 8:56 pm ]
Post subject:  Re: Roller rockers
Matt said he's the man !!!

Sent from my SM-N900V using Tapatalk
Author:  ron [ Sat Apr 26, 2014 9:01 pm ]
Post subject:  Re: Roller rockers
Oil barrels !!!! :evil::evil::evil:

Sent from my SM-N900V using Tapatalk
Author:  jeff69 [ Sat Apr 26, 2014 9:09 pm ]
Post subject:  Re: Roller rockers
I said the hell with the candy a$$ hills lets go to smokey falls


Sent from my iPhone using Tapatalk
Author:  ron [ Sat Apr 26, 2014 9:13 pm ]
Post subject:  Re: Roller rockers
Lmao !!!!!

Sent from my SM-N900V using Tapatalk
Author:  jesse [ Sat Apr 26, 2014 9:16 pm ]
Post subject:  Re: Roller rockers
Ron we got hills 2 miles down tue road you cant climb no need to dive 6 hours to kentucky :twisted:
Author:  ron [ Sat Apr 26, 2014 9:17 pm ]
Post subject:  Re: Roller rockers
I seen matt hit it , that's all o can say !!

Sent from my SM-N900V using Tapatalk
Author:  NRIbuggys [ Sat Apr 26, 2014 9:21 pm ]
Post subject:  Re: Roller rockers
Bragging rights coming soon


Sent from my iPhone using Tapatalk
Author:  jesse [ Sat Apr 26, 2014 9:23 pm ]
Post subject:  Re: Roller rockers
Haha all in fun but we do need another bragging rights
Author:  ron [ Sat Apr 26, 2014 9:28 pm ]
Post subject:  Re: Roller rockers
jesse wrote:
Ron we got hills 2 miles down tue road you cant climb no need to dive 6 hours to kentucky :twisted:

Lil girl , you want never walk in these shoes , get all your barbie dolls they you play with every nite , so they can watck too !!!! :roll:

Sent from my SM-N900V using Tapatalk
Author:  ron [ Sat Apr 26, 2014 9:29 pm ]
Post subject:  Re: Roller rockers
You ain't got the money r the balls to catch me punk !

Sent from my SM-N900V using Tapatalk
Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/