Does anybody know where to buy slugs or what other tubing will go into
1.5"x.095 tubing?


Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!

Not aware of any tubing that will fit well in .095. You might try 1" schedule 40 black pipe as it's measured with ID dimensions. I will say that 1 1/4" DOM works well in 1 1/2" 120 wall.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

That helps. Thanks Ody. Surely there are slugs for that. There is a race shop down the road. I guess I can ask them. But I like to hear my Woods buggy friends ideas.

Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!

As I recall the last time I did it, I used 120 wall 1 3/8" DOM and turned the slugs down to fit.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!

That makes sense. That's probably the cheapest way also. So I assume your buggy is made of .120 ?



Sent from my Galaxy S3 using TapaTalk

_________________
When in doubt pray harder!

No most of the buggy is .095. I replaced a section of one of the tree bars with .120.

_________________
Water cooled Dry Sumped Subaru Powered Turbo Charged Fuel Injected 2500CC Tank. Oh Rah! He who dies with the most Toys not only wins, He also wears them out!