I had Line-x spray the rear gate and the first 8'-0 of the floor it would have cost $600.00 but I bartered 1000 rounds of 9MM that I loaded so it cost me about $200.00 it is real nice just hose it out.

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)

I had my truck sprayed with lone x and it cost $530 for the whole bed. Was thinking 14 feet in and the carpet the rest with that out door carpet you see in truck beds.

_________________
I refuse to grow up therefore I will never grow old, and I will never die.

I added the other bar to my head/pushrod protectors that would keep it from bending upward. Changed spark plugs to hotter ones and adjusted one carb. Getting it ready to Ride Royal Blue this Saturday (hopefully).

_________________
When in doubt pray harder!

Took the brother in law for a ride!




He is hooked now.

_________________
I refuse to grow up therefore I will never grow old, and I will never die.

I put a new alt and v reg in it. Done. Tomorrow load it on the trailer and pack up to be ready to roll out Friday morning to Bellas gig.

_________________
Roads.... Where we are going, we don't need roads!

Spent a few hours debating on where to mount my oil cooler. Any ideas? Then I figured out my pulley is a power pulley so I probably don't even need an oil cooler.

_________________
If it ain't broke ill fix that

drilled and taped remote oil filter for a oil temp sensor.

I picked up a new buggy today. 1915 with a type 3 turbo and 6 rib trans. 16.5 wide paddles on the back 3 ribs on the front. Thing rips. Big jump from a worn out 1600 lol


Posted using the WoodsBuggy Mobile App

_________________
If it breaks it dont belong in there

I peeked down under the pavilion to see if it was getting wet from the rain thinking man I can't wait for next weekend still undecided where I will be riding wv or wellsville that is the big question

Aired the tires up on my 2 seater and fixed the front shock tower. Started taking the motor off my 1 seater.

Posted using the WoodsBuggy Mobile App

Got the 4 seater ready for Saturday....


I got this...

_________________
"I got this..."

Went over the new buggy today. Fixed so shabby wiring and put a tach in. Got some time to ride it and found I couldn't reach the pedals lol. Moved the seat front and adjusted the harness. Cant wait to get it up to do some climbing. Will try to post a pic soon.

_________________
If it breaks it dont belong in there

Posted using the WoodsBuggy Mobile App

_________________
If it breaks it dont belong in there

superdiff for the 091, 2332 mystic performance motor from aaron creech, new used beam (well 2 or 3 that made one good one), new brakes, reinforced cage (all but x-brace behind seats), new pads, new tie rods, new oil cooler, new brake lights, 4 led headlights (3 now that i smashed one in a fit of anger lol) and new tach.... and the ability to give it a tiny bit of pedal and they break loose

_________________
if it aint broke don't fix it
gun control is hiting your target

Drove it from the basement to the shop. Cleaned air filters and put covers on them. Drove it back to the basement. THE END

_________________
IF YA CAN'T RUN WITH IT....RUN FROM IT

I unloaded and washed it from the Ride Royal Blue trip .

_________________
When in doubt pray harder!

Loaded up Heading Out Tomorrow for a 6 day ride


Posted using the WoodsBuggy Mobile App

Checked timing and adjusted idle. Purrs like a kitten now. All ready to ride Labor Day. Can't wait


Posted using the WoodsBuggy Mobile App

_________________
If it breaks it dont belong in there

WOW. topgun...a 6 day ride .You lucky dog. Where are you going?

_________________
When in doubt pray harder!

Well we're starting out at Choccolloco Mtn. Then we're taking off to Grey Rock


Posted using the WoodsBuggy Mobile App

Took it out. Took the baby girl for a put-put. Put it away:) put trans strap on the new buggy and the rear wheels


Posted using my IPHONE

_________________
#If the throttle isn't floored, Your NOT havin FUN!!!!#

well installed a push in sand seal and new pulley, new belt. some new push rod tubes. (only the one that were leaking) new valve cover gaskets and adjusted valves last night. this afternoon i will put a new O ring on Dizzy and re-adjust the timing. and make sure she doesn't leak!! LOL!!! and then i need to adjust the rear torsion.
so it will set up a little higher! ( Friday night riding at Rush wasn't fun after i got a case of the Swamp arse after going through a deep water hole! LOL!! ) then i have some drop spindles for the front that i bought off a guy here on woods buggy that i may finally try to install! this week end.

I thought VW engines were supposed to leak to indicate that there was oil in the case!!!


Swamp arse now thats funny!!! been there though

_________________
Water Cooled Consortium, Chairman of the Build (Former AC purist)

I got the buggy loaded on the trailer gased up and ready to go to Biscuit Mtn in the morning. Ready to finally ride again. Last time I really rode some where was back in 2009 at Windrock.

_________________
I refuse to grow up therefore I will never grow old, and I will never die.

Pulling the carbs off to clean and rebuild today. After trying to ride yesterday at Biscuit the carbs pissed me off so its time to inspect clean and rebuild them.

Flipper
The Wild Kids

_________________
I refuse to grow up therefore I will never grow old, and I will never die.