WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

Trans seal
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=13672		 Page 1 of 1
Author:  duneman [ Thu May 17, 2012 6:05 pm ]
Post subject:  Trans seal
What would a guy have to go through to replace the seal under this.

Image
Author:  jayrod [ Thu May 17, 2012 7:32 pm ]
Post subject:  Re: Trans seal
If im thinking correctly, that seal in the cup pops out, theres a C clip behind it. Flange slides off and ya pop the seal your talking about out and pop the new one in. fairly simple. never replaced one myself. But pretty sure thats how it works.
Author:  kevin f [ Thu May 17, 2012 8:53 pm ]
Post subject:  Re: Trans seal
jayrod wrote:
If im thinking correctly, that seal in the cup pops out, theres a C clip behind it. Flange slides off and ya pop the seal your talking about out and pop the new one in. fairly simple. never replaced one myself. But pretty sure thats how it works.

thats it ive done a few that way, very easy.
Author:  duneman [ Thu May 17, 2012 9:46 pm ]
Post subject:  Re: Trans seal
you know where i can order the new seal? does Dans Performance sell em?
Author:  MickeyMouse [ Fri May 18, 2012 2:15 am ]
Post subject:  Re: Trans seal
i would think Dans would have them. If you call Dan's, tell Dan Emery that you are from Woodsbuggy.com.

He is a really nice guy and very knowledgable. His son actually races buggy's in CA.
Author:  smitty [ Fri May 18, 2012 3:22 am ]
Post subject:  Re: Trans seal
When u get the flange off look at the flange where the splines are and see if hole is in center of the flange. I had one I couldn't get to stop leaking and found that hole off center. It was so far off the seal didnt hit all the way around the seal surface.Called rancho and they replaced it for free, come to find out it was a empi part number. Wouldn't you know it.
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/