WoodsBuggy.com
http://www.woodsbuggy.com/phpBB3/

anyone ever do a 1.6 or a 1.8 toyota swap?
http://www.woodsbuggy.com/phpBB3/viewtopic.php?f=2&t=13373		 Page 1 of 1
Author:  wonnabuggy32 [ Fri Mar 16, 2012 10:59 am ]
Post subject:  anyone ever do a 1.6 or a 1.8 toyota swap?
i was wondering if anyone has ever done a toyota 1.6 or a 1.8 swap to their buggys.... would like some input on the good and the bad... thanks Greg.
Author:  Eric DeBord [ Sun Mar 18, 2012 8:35 pm ]
Post subject:  Re: anyone ever do a 1.6 or a 1.8 toyota swap?
My cousin put a 1.8 on a buggy once.. the wiring was super easy..Only 3 or 4 wires to hookup (to ground and 12V+ that is). I think it was out of a geo prism? 4afe maybe..cannot remember. It ran good and there are really no downsides, except radiator, fuel pump, and adapter plate..
Author:  woogiebugger1 [ Sun Mar 18, 2012 9:03 pm ]
Post subject:  Re: anyone ever do a 1.6 or a 1.8 toyota swap?
A friend of mine in Pa. has a 1600 twin cam out of a MR2 in a Champion frame, and it sh&ts and gits. AND, NO questions on the reliabilty homefront. Kennedy makes the adapter kit, and everything is straight forward. Should be as easy, or easier than an Ecotec. YEA, YEA, YEA, Iknow I'll hear a ton of sh$t from them GM boys, But you got a Toyota, and plenty of power to boot. DON'T BE SKEERED to do it. You'll fall in love, and be the # 1 tird in the sh^t parade ?????
Author:  2800passat [ Sun Mar 18, 2012 9:16 pm ]
Post subject:  Re: anyone ever do a 1.6 or a 1.8 toyota swap?
yeah. Do the fwd set up and don't buy Kennedy starter , adapter kit , press. plate , 4 puck clutch, throw out bearing , flywheel , carbs, bus trans , 4 spyder diff , weedle parts, alternator,header exaust,shifter, or $5K motor parts. uuuhh!
Author:  woogiebugger1 [ Sun Mar 18, 2012 9:40 pm ]
Post subject:  Re: anyone ever do a 1.6 or a 1.8 toyota swap?
AND THAT WOULD BE ??????? :?: :?: :?: :)
Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/